Miele T1405, T 1405 Frequently asked questions, What if the program runs too long or stops?

Page 18

Frequently asked questions

What if the "Filter/Vent" indicator lights after cleaning the exhaust system?

Possible fault

Fix

The dryer is not operating efficiently

Check the exhaust length and diameter

because the duct hose is too long.

(see "How to calculate the effective

 

duct length"). A long exhaust hose will

 

increase program times and energy

 

consumption.

 

If the exhaust hose cannot be

 

shortened, the indicator can be turned

 

off by a service technician.

 

 

What if the program runs too long or stops?

Possible fault

Fix

 

 

The airflow is insufficient in the area of

Open a window or door to increase

the dryer.

airflow.

 

 

The lint filters are clogged.

Clean the lint filters (see "Dryer care").

 

 

The laundry was not spun sufficiently in

Select a higher spin speed in the wash

the washer.

program.

 

 

The dryer is overloaded.

Reduce the load size.

 

 

Metal zippers interfere with the dryer’s

Select a timed program to avoid

moisture sensors.

overdrying.

 

 

An airflow gap of 3/8" (10 mm) must be

This gap must not be blocked by a

provided between the machine and the

toekick or thick piled carpets for

floor.

sufficient airflow.

 

 

What if the laundry is not dry enough?

Possible fault

The load contained too many dissimilar items (size and fabric.)

What if water has collected around the drum opening?

Possible fault

This is condensed moisture from the laundry.

18

Image 18
Contents Operating Instructions Vented Dryer 1405 Table of Contents Important Safety Instructions This dryer is intended for residential use onlyImportant Safety Instructions Control panel Before loading the dryer Program recommendationsUsing the dryer Turn on the dryer and load the laundrySelect a program Program When to use Extra DryFull load Select a drying option if neededTurbo GentleAdjusting the buzzer volume Select the dryness levelSelect the buzzer if desired Start the program At the end of a programCanceling or changing a program Adding or removing laundry during a programTo activate the child lock Child lockChild lock To deactivate the child lockCleaning the lint filter Dryer careCleaning the exterior and the control panel Cleaning the drumChanging the light bulb How do I prevent static cling? What if the Filter/Vent fault indicator is lit?What if the dryer will not run? What if the drum light does not come on?What if the laundry is not dry enough? Frequently asked questionsWhat if the program runs too long or stops? What if water has collected around the drum opening?Quick Guide Select a program Quick GuideTurn on the dryer and load the laundry Select a drying option if neededSelect the dryness level Select the buzzer if desired Start the programAt the end of a program For uniform loads, e.g. sheets Underwear, socks Technical Service PC UpdatePage Installation Instructions Important Safety Instructions Caring for the environment Disposal of the packing materialsDisposal of an appliance Height of vent adapter in a stacked installation Washer / Dryer StackEasy Installation KIT Electrical connectionInstallation Determining the position of the exhaust connection InstallationLeveling the dryer Changing the position of the exhaust connectionInstallation tips Window connection Wall connection with rigid pipeDirect wall connection Dryer top viewHow to calculate the effective duct length Tips about the ductworkConcertina bend Smooth metal ductElbow 90 sharp Wall vent or window ventTotal duct length Page Page All rights reserved
Related manuals
Manual 3 pages 50.36 Kb