Miele T 1405, T1405 operating instructions Window connection, Wall connection with rigid pipe

Page 33

Installation

Exhaust connection with a flexible exhaust hose or rigid pipe

Using the connector supplied, an exhaust hose (4" [100 mm] diameter) can be installed.

Necessary materials:

–a wall or window duct

–an exhaust hose made of approved non-flammable material

^Install the connector, 1, with the exhaust hose or pipe, 2, to the dryer.

Window connection

1Window connection (installed in a plexiglass pane)

2Connector for the flexible exhaust hose

Wall connection with rigid pipe

1Wall pipe

2Connector

3Rigid pipe

29

Image 33

Contents Operating Instructions Vented Dryer 1405 Table of Contents This dryer is intended for residential use only Important Safety InstructionsImportant Safety Instructions Control panel Program recommendations Before loading the dryerUsing the dryer Turn on the dryer and load the laundrySelect a program Extra Dry Program When to useTurbo Select a drying option if neededFull load GentleAdjusting the buzzer volume Select the dryness levelSelect the buzzer if desired At the end of a program Start the programAdding or removing laundry during a program Canceling or changing a programChild lock Child lockTo activate the child lock To deactivate the child lockDryer care Cleaning the lint filterCleaning the drum Cleaning the exterior and the control panelChanging the light bulb What if the dryer will not run? What if the Filter/Vent fault indicator is lit?How do I prevent static cling? What if the drum light does not come on?What if the program runs too long or stops? Frequently asked questionsWhat if the laundry is not dry enough? What if water has collected around the drum opening?Quick Guide Turn on the dryer and load the laundry Quick GuideSelect a program Select a drying option if neededSelect the dryness level Select the buzzer if desired Start the programAt the end of a program For uniform loads, e.g. sheets Underwear, socks PC Update Technical ServicePage Installation Instructions Important Safety Instructions Caring for the environment Disposal of the packing materialsDisposal of an appliance Washer / Dryer Stack Height of vent adapter in a stacked installationElectrical connection Easy Installation KITInstallation Leveling the dryer InstallationDetermining the position of the exhaust connection Changing the position of the exhaust connectionInstallation tips Wall connection with rigid pipe Window connectionDryer top view Direct wall connectionTips about the ductwork How to calculate the effective duct lengthElbow 90 sharp Smooth metal ductConcertina bend Wall vent or window ventTotal duct length Page Page All rights reserved

Related manuals

Manual 3 pages 50.36 Kb