Miele W 1113 operating instructions Special spin options, Hold, No spin

Page 13

Using the washer

Special spin options

Hold

^Select "Hold".

The laundry is not spun and remains soaking in water. This will prevent wrinkles if the laundry is not removed immediately at the end of the wash program.

To start the final spin:

The washer is set to default to the maximum spin speed of the wash program. You can select a lower spin speed. Start the final spin with the "Start/Stop" Tbutton.

To finish the program:

Press the "Door" button. The water will be drained away.

Use the "Door" button to open the door.

No spin

^Select "No spin".

The laundry is not spun after the final rinse, but the water is drained away. After the drain cycle, the washer goes immediately into the anti-crease cycle. Spinning between these rinses is also omitted in this setting. If "No spin" is selected in the programs "Sturdy" and "Custom", an extra rinse cycle is added.

13

Image 13
Contents Operating instructions Contents Contents Important Safety Instructions Control panel Guide to the washerBefore using for the first time Prepare and sort the laundry Using the washerGeneral tips Close the drum door Load the laundry Select a programProgram guide Cold Med Temperatures Fabric Spin Laundry Care Speed Symbol WoolensSilk HandwashSelect wash options if needed Select the temperature and spin speed Hold Special spin optionsNo spin Too little detergent may cause Add detergentToo much detergent may cause Normal soiling DetergentHeavy soiling Water softener Water hardnessFabric softener Do not exceed the maximum level mark StarchCancelling Delay Start Select Delay Start if neededStart the program Activate the program lock if necessaryRemove the laundry Making changes to the program Cancelling a programInterrupting a program Drum door cannot be opened if Adding/removing laundry during a wash programLocking the washer Child Safety LockElectronic program lock Cleaning the detergent drawer Cleaning the washerClean the siphon tube Washer careOpen the drain filter door Cleaning the drain pumpWasher care Remove this guide for easy reference Quick GuideSort the laundry Quick GuideLoad the laundry Select a programSelect Delay Start if needed Select the temperature and spin speedAdd detergent Start the programNormal Options Cleaning the inlet hose filter Cleaning the water inlet filtersCleaning the filter in the inlet valve Wash program cannot be started Frequently asked questionsProgram was interrupted and a fault message appears General issues with the washer Poor wash results Door will not open when the Door button is pressed Remove the tool Opening the drum door during a power failurePC Update Technical ServiceWarranty terms Optional accessoriesInstallation Instructions Disposal of the packing material Help protect our environmentDisposal of an appliance Front view InstallationBack view Installation site Remove the shipping struts InstallationDo not lift the washer by the drum door Pull out the shipping strut InstallationInstalling the shipping struts Level the washer Adjust the four leveling feetReinstallation of the machine lid Installation beneath a counterWasher stand with drawer Plumbing Optional accessory hose extensionTips for a hot water connection Water connectionDrainage Grounding Instructions Electrical connectionPage Page Page Alterations rights reserved
Related manuals
Manual 56 pages 63.57 Kb