Miele G 7883 Adding detergent, Liquid detergent, Maintenance of the dispensing system

Page 22

Adding detergent

Only use cleaning agents formulated for this machine. Do not use detergents formulated for domestic dishwashers.

Liquid detergent

It is recommended that mildly alkaline liquid detergents be dispensed via the optional DOS module.

Maintenance of the dispensing system

To ensure trouble-free operation, the following regular maintenance should be carried out by a Miele approved service technician.

Replace the dispensing hoses in the DOS modules every 12-18 months.

Note

As a separate option, this machine can also be fitted with a dispenser pump for automatic liquid detergent dispensing (DOS-Module G 60). This is connected externally. Contact Miele for details.

The optional DOS Module G 60 is supplied with its own installation and connection instructions.

See "Programming special functions" for information on priming the dispensing system and setting the dosage.

Take care when handling liquid agents and additives. These may contain irritant or corrosive ingredients.

Follow the manufacturer’s safety instructions and relevant Health and Safety procedures carefully.

Wear protective gloves and goggles.

22

Image 22

Contents

Laboratory Glassware Washer 7883 Contents Important Safety Instructions Installation and ServiceUse Burn HazardImportant Safety Instructions Accessories Disposal of an applianceDescription of the machine Guide to the lab washer Guide to the lab washer Electric door lock To cancel a programOpening and closing the door To open the doorTo open the door with the emergency release Water softener Settings SettingsSetting the water softener Filling the salt reservoir Salt indicator Adding rinse aid Unscrew the cap Setting the rinse aid dosage Setting the dosage and priming the dispensing system Adding neutralizing agentTo access the programming mode To store the settingsPriming the neutralizing system Adding detergent Maintenance of the dispensing systemLiquid detergent Powdered detergent Add detergent to the compartmentLoading the machine LoadingRemove debris Please contact Miele’s application specialist for advice 350 Injector wagon Loading examplesUpper basket 187 Injector wagonLower basket 106 109To adjust the upper basket Adjusting the upper basketExample Upper basket O 188/1 and lower basket U Program guide Drain RinseSpecial DOS Starting a program OperationTurning on Wash block codesAt the end of a program DryingChanging a program Turning offCanceling a program Programming special functions Accessing the programming levelGeneral note Programming special functions When the dispensing system is primed, always DOS 3 Neutralizer Setting the dosage concentration Programming special functions Main wash temperature holding time Main wash temperatureTo store settings Main washFinal rinse temperature holding time Final rinse temperatureFinal rinse Setting the buzzer To turn the buzzer offRestoring the factory settings Machine care Cleaning the coarse filterCleaning the fine, flat and micro-fine filters Filter combinationCleaning the non-return valve and drain pump Cleaning the front of the machine Cleaning the filters in the water inletCleaning the control panel To clean the filtersTrouble shooting What if … Possible fault FixFollowing fault code Indicator flashesFault code F a If this switch trips repeatedlyTrouble shooting After Sales Service Page Installation Instructions Disposal of the packing material Caring for the environmentDisposal of the appliance Positioning and securing the machine InstallationInstallation options Free-standing Undercounter Steam Deflector protects the countertopRemoving the lid if necessary Open the doorPlumbing Water inletDI-Water connection Drainage Electrical connection Re-assembling the service panel Removing the service panelGrounding connection Technical data English MetricPage Page Page All rights reserved

Related manuals

Manual 72 pages 54.95 Kb

Manual 48 pages 24.31 Kb