Operation
Turning on
^Close the door.
^Press the "On/Off" button.
When the program selector is at the "Stop" f position, a point lights up in the display.
Starting a program
^Turn the program selector clockwise or counterclockwise to the required program.
The temperature of the first rinse of the program selected (except for
^Select the "Drying" 0 function if required (see "Drying").
^Press the "Start" 6 button. The actual temperature will appear in the display.
The "Start" indicator will remain lit.
Once the program has started, all other programs are blocked. If the program selector is turned to another program, the values shown in the display will go out. The values can be seen again if the program selector is turned back to the position of the program currently in operation.
^During a program, the "Display" ß button can be used to toggle between the elapsed time, the active wash block and the actual temperature.
Wash block codes
1 =
2 =
3 = Main Wash 1
4 = Main Wash 2
5 = Chemical Disinfection
6 = Interim rinse 1
7 = Interim rinse 2
8 = Interim rinse 3
9 = Interim rinse 4
10 = Final rinse 1
11 = Final rinse 2
12 = Drying TA
13 = Drying
31