Miele T 8019 C installation instructions Emptying the condensed water container

Page 16

Dryer care

Emptying the condensed water container

Depending on the installation, the condensed water will either be pumped to a drain or collected in the condensed water container, located in the upper left corner of the machine.

The container holds approximately 1 gallon of water.

The container should be emptied weekly.

Should the container be full when the tumble dryer is started, or if it becomes full during normal operation:

The "Container" indicator will light.

The buzzer will sound.

^Pull out the container slightly to the right with both hands.

^Hold the cap open while emptying the container.

^When the container is empty, push it back into its opening until it clicks into place.

^Restart the drying program if needed.

Do not drink the condensed water!

16

Image 16
Contents En US, CA Contents Important Safety Instructions This dryer is intended for residential use only~ Grounding Instructions Control panel Before loading the dryer Program recommendationsTurn on the dryer and load the laundry Using the dryerSelect a program Available drying options Gentle, Anti-crease Extra DrySelect a drying option if needed TurboGentle Anti-creaseSelect the dryness level To adjust the buzzer volumeSelect the buzzer if desired Start the program At the end of a programCanceling or changing a program Adding or removing laundry during a programChild lock Child lockTo activate the child lock To deactivate the child lockCleaning the lint filter Dryer careCleaning the exterior and the control panel Cleaning the drumEmptying the condensed water container Cleaning the condenser Removing the condenser Open the doorChecking the condenser Cleaning the condenser Returning the condenserChanging the light bulb Quick Guide Quick Guide Turn on the dryer and load the laundrySelect a program Select a drying option if neededSelect the buzzer if desired Start the program Select the dryness levelAt the end of a program Program When to use Normal Available drying options Turbo, Gentle, Anti-creaseWhat if the dryer will not run? Possible fault Solution How do I prevent static cling?Frequently asked questions What if the laundry is not dry enough? Possible faultAfter sales service PC UpdateRepairs MieleCarePage Installation Instructions Important Safety Instructions Disposal of the packing materials Caring for the environmentDisposal of an appliance Height of a stacked installation Washer / Dryer StackElectrical connection Installation Front viewTransporting the dryer to the installation site Installation site Installation beneath a counterReinstallation of the machine lid Installation tips Level the dryer Installing the decor panel Installation Shortening the door panelInstalling the drain hose Do not pull or kink the drain hose External water drainSpecial Installation Installing the drain hose sink, gullyExample Connection to a standpipe Page Page