Miele T 8019 C installation instructions What if the dryer will not run? Possible fault Solution

Page 25

 

Frequently asked questions

 

 

 

 

What if the dryer will not run?

 

Possible fault

Solution

 

 

The "Start/Stop" button was not

Make sure the dryer is on. Press the

pressed.

"Start/ Stop" button to begin the drying

 

program.

 

 

The circuit breaker tripped or the dryer

Make sure the dryer is plugged in or

is unplugged.

reset the circuit breaker.

 

 

The door is not closed.

Close the door properly.

 

 

How do I prevent static cling?

Add fabric softener to laundry when washing or select the "Less Dry" setting on the dryer.

Do not use fabric softener sheets in this dryer.

What if the drum light does not come on?

Possible fault

Solution

 

 

The bulb may be bad or burned out.

See "Changing the light bulb."

 

 

What if the "Child Lock" indicator flashes after turning the dryer on and a program cannot be started?

Possible fault

Solution

 

 

The child lock is activated.

Deactivate the child lock. See "Child

 

Lock."

 

 

What if the program stops, the "End/Anti-crease" indicator lights and the buzzer sounds?

Possible fault

Solution

 

 

The drum is empty.

Load laundry into the dryer. The dryer

 

will not operate when the drum is

 

empty. Single items should be dried

 

with "Sturdy" or a timed program and

 

dry items in the "Fluff" program.

 

 

21

Image 25
Contents En US, CA Contents This dryer is intended for residential use only Important Safety Instructions~ Grounding Instructions Control panel Program recommendations Before loading the dryerTurn on the dryer and load the laundry Using the dryerSelect a program Extra Dry Available drying options Gentle, Anti-creaseTurbo Select a drying option if neededGentle Anti-creaseSelect the dryness level To adjust the buzzer volumeSelect the buzzer if desired At the end of a program Start the programAdding or removing laundry during a program Canceling or changing a programChild lock Child lockTo activate the child lock To deactivate the child lockDryer care Cleaning the lint filterCleaning the drum Cleaning the exterior and the control panelEmptying the condensed water container Removing the condenser Open the door Cleaning the condenserChecking the condenser Returning the condenser Cleaning the condenserChanging the light bulb Quick Guide Turn on the dryer and load the laundry Quick GuideSelect a program Select a drying option if neededSelect the buzzer if desired Start the program Select the dryness levelAt the end of a program Normal Available drying options Turbo, Gentle, Anti-crease Program When to useHow do I prevent static cling? What if the dryer will not run? Possible fault SolutionWhat if the laundry is not dry enough? Possible fault Frequently asked questionsPC Update After sales serviceRepairs MieleCarePage Installation Instructions Important Safety Instructions Disposal of the packing materials Caring for the environmentDisposal of an appliance Washer / Dryer Stack Height of a stacked installationElectrical connection Front view InstallationTransporting the dryer to the installation site Installation site Installation beneath a counterReinstallation of the machine lid Installation tips Level the dryer Installing the decor panel Shortening the door panel InstallationExternal water drain Installing the drain hose Do not pull or kink the drain hoseSpecial Installation Installing the drain hose sink, gullyExample Connection to a standpipe Page Page