Miele T 9820 Laundry is not dry enough Possible fault Solution, Drum light does not come on

Possible fault

Solution

The load contained too many

– Continue drying using the "Warm air"

dissimilar items (size and fabrics.)

program.

– Select a suitable program.

The laundry is still wet. The program runs too long.

The gas supply is insufficient.

Check if the gas shut-off valve is closed.

The drum light does not come on.

The light turns off automatically

Close and open the door, the light should

(energy saving).

come on.

The bulb may be bad or burned

Change the light bulb.

out.

See "Dryer Care".

The air supply is insufficient.

Open a window or door to increase air flow.

The lint filter is clogged with lint.

Clean the lint filter.

The exhaust hose or the

– Check the exhaust parts (e.g. wall vent

connection is clogged with lint.

duct, louvered wall vent, bends, etc.)

regularly for air permeability.

– Remove the lint.

The laundry was not spun

Spin laundry thoroughly before drying.

sufficiently in the washer.

The dryer is over loaded.

Regard the maximum load size per

program.

Metallic zippers prevent a correct

– Open the zippers of the laundry before

measurement of the laundry’s

drying.

residual moisture.

If the problem persists, dry items with long

zippers using the "45 min. warm" program,

if necessary use the laundry basket.