Miele T 9820 operating instructions Laundry is pressed on the door and below the door

Possible fault

Solution

This is not a fault.

– The indicator goes out by opening and closing

The electronic has

the door.

detected that there is no

– Single items should be dried with the

laundry in the drum and

"45 min. warm" program, if necessary use the

cancels the program.

laundry basket.

Single items or already

dried laundry can also

cause a program stop.

The fault cannot be

–

The indicator goes out by opening and closing

detected immediately.

the door.

–

Start a program.

If the problem persists call Technical Service.

The laundry is pressed on the door and below the door.

The restriction insert in the

–

Reinsert the restriction insert in the vent opening.

vent opening at the rear of

Removing it may result in poor drying results,

the dryer was removed.

damage to the laundry and higher CO2

emissions.