Installation
Connecting to an external drain
The condensed water can be sent directly to a drain if the machine is installed near a sink or standpipe.
The machine is equipped with a non- return valve that will prevent water from flowing back into the machine if there is a problem in the drainage system.
Max. drain hose length: 10 ft
Max. drain height: 4 ft.
Supplied accessories:
-6 ft drain hose
-Hose clamp
-Hose elbow
To make a direct drain connection, proceed as follows:
^Loosen the hose clamp at the drain outlet at the rear lower left of the machine and remove the rubber plug.
^Remove the clamp from the plug and place it over the drain hose.
^Push the drain hose onto the drain outlet. Make sure that the hose is not kinked and firmly secured by the hose clamp.
26