Installation
Changing the decor panel
Note: The door should be closed when installing the decor panel.
^On the door lock side remove the 4 screws (3 on the side and 1 underneath) and the door strip.
^Loosen the remaining 7 screws on the lower and side decor strips until the decor panel can be bowed slightly and taken out.
^Insert the new panel.
^Reassemble in the reverse order and tighten the screws.
Decor panel dimensions
Width: | 23 11/16 |
Height: | 23 1/8 |
Thickness: | 1/16 |
Panels between 1/16 and 1/8 thick require an adapter strip available from the Technical Service Department.
Fitting a toekick panel
The appliance toekick below the door can be concealed using a toekick panel.
The height and depth of the appliance toekick cannot be altered.
A
25