Miele T 1570 C What if, . . . ? Possible fault Fix Anti-crease, Indicator lamp, Drum door opens

Frequently asked questions

What if, . . . ?	Possible fault	Fix
. . . the "anti-crease"		– Turn the program
indicator lamp in the		selector to "finish".
sequence indicator		– Turn the machine off
display starts flashing?		and then on again.
		– Select a program..
		– Press the "Start" button.
		If the indicator lamp starts
		flashing again, this
		indicates a fault in the
		machine.
		Please contact the Miele
		Service Dept.
. . . the drum door opens	The machine has	Before restarting the
during the drying cycle?	overheated. The	program, proceed as
	temperature limiter	follows:
	opened the drum door	– Release the ON/OFF
	and caused the machine	button.
	to turn off automatically.	– Clean the affected part
	Possible reasons for
		of the machine.
	overheating:
		– Turn on the machine
	– The lint filter in the door
		again.
	is clogged.
		– Reselect the
	– The vent duct is
		terminated program.
	blocked.
		– Press the “Start”
	– The vent aperture (e.g.
		button.
	louvred window vent,
		If the drum door opens
	wall vent) is blocked.
		again, the Miele Service
		Dept. should be
		contacted.

18