Miele T 1565 C operating instructions Problem solving guide, What to do if, . . . ? Cause Remedy

Problem solving guide

Electrical appliances should only be repaired by qualified personnel. Incor- rectly repaired machines may put the user at risk. There are, however, minor problems which can be corrected without contacting the Service Department.

What to do if, . . . ?	Cause . . .	Remedy . . .
. . . the tumble dryer fails to	Check whether the “On”	Repeat the switch-on
start when turned on?	indicator lights up. If so, failure	procedure in the correct
	to start may be due to an	sequence, as outlined in the
	incorrect program selection	“Program Selection” section.
	procedure.
	If the “On” indicator lamp does	– The “ON/OFF” button is
	not illuminate, check that:	depressed.
		– The door is properly closed.
		– The machine is plugged in
		and the fuse or circuit breaker
		has not tripped.
. . . the laundry is not	The load consisted of dissimilar	Select a longer drying
sufficiently dry?	items (size and fabrics).	program.
	Small loads or individual items	Small loads can be time-dried.
	may cause the program to
	terminate prematurely.
. . . the drying times are too	The lint filter is clogged.	Clean the lint filter in the door.
long?	The laundry was not spun in	Make sure that the laundry is
	the water for a sufficient time.	thoroughly spun before drying.
. . . the “anti-crease”		– Turn the program selector
indicator lamp in the		to “finish”.
sequence indicator display		– Turn the machine off and
starts flashing?		then on again.
		– Select a program.
		– Press the “Start” button.
		If the indicator lamp starts
		flashing again, this indicates a
		fault in the machine.
		Please contact the Miele
		Service Dept.

18