Miele T 1302 operating instructions Start the program, At the end of a program

Page 11

Using the dryer

6. Start the program

^Press the "Start/Stop T" button.

Once the program starts, the current cycle of the program will be indicated in the "STATUS" display.

7. At the end of a program

The "Anti-crease/End" indicator will light at the end of a program and the buzzer will sound if it was selected.

If a fault occurred, a "FAULT" indicator will light. See "Frequently asked questions" for details.

^Press the "Door" button.

^Open the door.

^Remove the laundry.

^Check that the drum is empty.

^Clean the lint filter after each use (see "Dryer care").

^Close the door.

^Press the "On/Off" button to turn off the dryer.

11

Image 11

Contents Operating Instructions Vented Dryer 1302 Contents This dryer is intended for residential use only Important Safety InstructionsImportant Safety Instructions Control panel Program recommendations Before loading the dryerSelect a program Using the dryerTurn on the dryer and load the laundry Extra Dry Program When to useGentle Select a drying option if neededTurbo Full loadSelect the buzzer if desired Adjusting the buzzer volumeSelect the dryness level At the end of a program Start the programAdding or removing laundry during a program Canceling or changing a programTo deactivate the child lock Child lockChild lock To activate the child lockDryer care Cleaning the lint filterCleaning the drum Cleaning the exterior and the control panelChanging the light bulb What if the drum light does not come on? What if the Filter/Vent fault indicator is lit?What if the dryer will not run? How do I prevent static cling?What if water has collected around the drum opening? Frequently asked questionsWhat if the program runs too long or stops? What if the laundry is not dry enough?Quick Guide Select a drying option if needed Quick GuideTurn on the dryer and load the laundry Select a programAt the end of a program Select the dryness levelSelect the buzzer if desired Start the program For uniform loads, e.g. sheets Underwear, socks PC Update Technical ServicePage Installation Instructions Important Safety Instructions Disposal of an appliance Caring for the environmentDisposal of the packing materials Washer / Dryer Stack Height of vent adapter in a stacked installationElectrical connection Easy Installation KITInstallation Leveling the dryer InstallationChanging the position of the exhaust connection Determining the position of the exhaust connectionAdapter Installation tipsWall connection with rigid pipe Exhaust connection with aFlexible exhaust hose or rigid Pipe Window connectionDryer top view Direct wall connectionTips about the ductwork How to calculate the effective duct lengthWall vent or window vent Smooth metal ductElbow 90 sharp Concertina bendTotal duct length Page All rights reserved