Hoover visionhd manual Investigating malfunctions

Page 25

Investigating malfunctions

What might be the cause of…

Defects you can remedy yourself

 

MALFUNCTION

CAUSE

REMEDY

 

 

 

 

 

 

1.

Does not work on any

Plug not in socket.

Plug it in.

 

programme

Not switched on.

Switch on.

 

 

 

Power failure.

Check.

 

 

 

Fuse blown.

Check.

 

 

 

Door open.

Close door.

 

2.

Does not fill with water

See cause 1.

Check.

 

 

 

Tap turned off.

Turn on tap.

 

 

 

Programme selector not correctly

Position programme selector

 

 

 

positioned.

correctly.

 

 

 

Fill hoses are kinked

Straighten fill hoses

 

3.

Water does not drain

Kink in discharge hose.

Straighten discharge hose.

 

away

Foreign bodies in filter

Examine filter (see pages 23-24)

 

 

 

House drain is blocked

Clean drain

 

4.

Water on floor around

Leaking gasket between tap and water

Replace gasket and tighten hose and

 

the washing machine

inlet hose.

tap well.

 

 

 

House drain is blocked

Clean drain

 

 

 

Soap drawer blocked with soap residues

Clean soap drawer

 

5.

Does not spin

Water has not yet drained away.

Wait a few minutes for machine to empty.

 

 

 

"No spin" selected (certain models only).

Reset button or turn "no spin" knob.

 

6.

Machine vibrates a lot

Washing machine not completely level.

Adjust the special adjustable feet.

 

during spin

Transit brackets not removed yet.

Remove transit brackets.

 

 

 

Load not distributed evenly.

Rearrange the laundry evenly.

 

 

 

 

 

 

7.

Door will not open

Two minutes have not elapsed since the

Wait two minutes.

 

 

 

programme finished.

 

The machine makes a different noise when spinning! This is because it has a brush motor for better performance.

Only a small level of water can be seen in the drum! This is because new machines do not use much water, yet achieve the same standard of washing and rinsing.

25

Image 25
Contents Washing machine Instructions for use Introduction Contents For cleaning or maintenance of the washing machine Safety notesWater temperature can reach 90C during the wash cycle General delivery notesWashing Quick startH I L M N E F G Description of controlsDoor handle Door Security indicator lightSTART/PAUSE button To cancel the Delay Start function Delay Start buttonFast Iron button Sensitive Care buttonSpin Speed button Time to END indicator light Spin speed indicator lightWash temperature indicator light Wash Temperature buttonProgramme selector with OFF position Buttons indicator lightTable of Programmes Please read these notes Every case, never mix NON-FAST Coloureds fabrics Programme selectorWash Special Rinse ProgrammeDaily Wash 40C Fast 44’ Auto half loadDetergent drawer Additional laundry aids Choice of detergent General purpose detergentsDo not put solvents in the washing machine Dosage for powder detergent DosagesLiquid detergent dosage When is prewashing really needed? Useful advice for usersWhich wash temperature should you choose? Do a full load in your washing machineMain wash Dry cleanSorting the laundry Correct way to wash When the programme is finishedSelecting the wash programme Cleaning the drawer compartments Cleaning and routine maintenanceCleaning the filter Cleaning the door glass What might be the cause of… Defects you can remedy yourself Investigating malfunctionsPage Technical data Setting UP + Installation Water connection Electricity supply and safety advice Page 10.06 43800413.B