IRONING INSTRUCTIONS
Note: The iron may smoke slightly when switched on for the first time. This is normal and will soon cease.
Please read these instructions carefully before use.
Important!: have you read the section “Important Safe- guards”?
CHOICE OF WATER
-This iron can be used with normal tap water.
-If the water in your area is particularly hard. It is advisable to use distilled or demineralized water to prevent the scale forming on the critical point of the iron.
-Do not use chemically
FILLING WITH WATER
- Ensure that the iron is disconnected from the pow- er supply before filling.
-Turn the dry/steam selector dial to “0” or dry position.
-Fill water through the aperture using the measur- ing cup only. (If you fill the iron at the tap, water can spill into the electrics and trip your earth leakage or blow the iron.)
Note* Do not fill higher than indication “MAX” of the water tank, In order to avoid spilling out of water.
-Do not fill with any thing but clean water. If you have to refill while ironing, remove the mains plug from the wall socket before filling.
-Pour out any remaining water after use.
SETTING THE TEMPERATURE
-Insert the plug in the wall socket and stand the iron upright.
-Set the temperature control dial to the correct temperature as indicated in the ironing instructions on the label or as per table above.
-The correct temperature will be reached when the indication light has switched off. The indication light will go on and off from time to time indicating that the selected temperature is being maintained.
Note: Water may leak from the soleplate if the temperature selected is too low.
This will then cause stains. If it happens, set the temperature control to the advised position for steam ironing. Steaming will
SPRAYING
-At any temperature by pressing on the spray button a couple of times, the laundry can be damped down.
-Ensure that there is enough water in the water tank.
23300A_IM.indd 4
2011/11/30 08:43:20