JVC TH-A10 Sound Menu Settings, Adjusting the balance, Using loudness, Opening the Sound Menu

Page 43

SOUND MENU Settings

Use the primary remote control to perform SOUND MENU settings.

Buttons used ————————————————

MAIN ON SCREEN and the 2/3/5/∞cursors.

MAIN ON SCREEN

2/3/5/∞cursors

Adjusting the balance

Adjusting the front speaker balance.

1. Open the SOUND MENU.

See “Opening the SOUND MENU”.

2. Move the pointer to BALANCE using the 5/∞ cursors.

3. Use the 2/3cursors to adjust the balance.

Press 2to shift the balance to the left.

Press 3to shift the balance to the right.

Using loudness

When listening to audio at low volume, sounds in the highest and lowest frequencies become difficult to hear.

Turning loudness ON augments low and high frequency ranges for a fuller sound at low volume.

Opening the SOUND MENU

1. Stop DVD image playback on the TV screen.

Select a playback source other than the tuner. If the playback source is set to DVD, press STOP to quit playback.

2. Press MAIN ON SCREEN.

The MAIN MENU will be displayed.

3. Move the pointer to the SOUND MENU tag using the 2/3cursors.

4. When you are finished with on-screen settings, press MAIN ON SCREEN again to close the SOUND MENU.

1. Open the SOUND MENU.

See “Opening the SOUND MENU”.

2. Move the pointer to LOUDNESS using the 5/∞ cursors.

3. Use the 2/3cursors to select ON or OFF.

Pressing 2/3 toggles loudness ON/OFF.

41

Page 42 Page 44
Image 43
Page 42 Page 44
Contents TH-A10 For U.S.A Table of Contents Important cautions Checking the supplied accessoriesSafety precautions Getting StartedFront right speaker System outlineCenter speaker SP-XCA10 Front left speaker Rear left speakerTo hang satellite speakers from the wall InstallationAdjusting the angle of the satellite speakers SpeakerVideo CDs with Playback Control function About discsPlayable disc types Disc structureFM antenna connections Connecting the TVConnections AM antenna connectionsTo connect speakers Connecting the rear and center speakersConneceting the front speakers If your audio components have a Compu LINK-3 terminal Analog connectionsVideo component connections Analog component connectionsTV sound Digital connectionsCenter unit Power sub-woofer Connecting the power cordLight up the primary remote control buttons Plug the power cord into an AC outletDisplay window Powered sub-wooferParts Identification Center unitPrimary remote control Remote controlsPrinciples of operation Operation with the remote controlBasic operation with the on-screen menu To operate via the on-screen menuDisplaying the on-screen menu On-screen menu componentsFor DVD On-screen menus On-screen menus for using discsPreventing screen burn-out with Screen saver Screen Saver Opening screens DVD Control display VCD Control displayBasic operations To turn the system power supply On and OFF standbyTo turn TV power on and OFF Adjusting volumePress one of the source selecting buttons Muting the soundSelecting the source to play Changing the source nameChanging the decode mode Selecting the analog or digital input ModeSub-woofer volume control Phase setting Adjusting the Input Signal LevelAudio channel display lamp Using the DSP Modes Using the Sleep TimerPress Surround Press DSP ModeBefore recording a digital source, turn off the DSP mode When selecting DAPTo play a disc Using the DVD playerFast forward and rewind PausingLocating the beginning Press Resume during playback Resuming playbackSelecting playback from the DVD menu Press ¢orTo specify the title or track number for Playback Video CD menuPress DVD on Screen To play from the beginning of a title Chapter, or trackTo specify the chapter number for Playback CHAP. Search To specify the time for playbackUse the number buttons 0~9 to enter the time To select the screen for playback from Digest screen DigestSEARCH, then press Enter Press DigestPress Pause at the section you wish to view in slow motion To display Continuous Photos StrobeSlow-Motion Playback Slow Hold down FF/¢or 4/REW for more than 2 secondsChanging the Subtitle Language Zooming a scene ZoomUse Cursor 5/∞to move the pointer to Audio Changing the audio channel AudioUse Cursor 5/∞to move the pointer Subutitle Use Cursor 2/3to select the desired audio language or soundNumber Use Cursor 2/3/5/∞to select the desired angle Press EnterSelecting a scene angle from the on-screen display Selecting an angle from the angle list displayOr all tracks Repeat Selecting the Picture CharacterUse Cursor 5/∞to move the pointer to Sampling all tracks IntroUse Cursor 5/∞to move the pointer to Time Select Programming the Playing Order Tracks ProgramUse Cursor 5/∞to move the pointer Program and press Enter Quitting programmed playback Random Play RandomPress Play to start program play Use Cursor 5/∞to move the pointer RandomTuning in stations manually Using preset tuningReceiving radio broadcasts Beat cut Selecting the FM reception modeWhen an FM stereo broadcast is hard to receive or noisy Press FM ModeSound Menu Speaker Menu Performing miscellaneous settingsDVD settings on-screen display Main MenuSetting the Sleep Timer Main Menu SettingsOpening the Main Menu When the source is not DVD or Tuner Changing the DSP ModeAdjusting the volume When the source is DVDOpening the Sound Menu Sound Menu SettingsAdjusting the balance Using loudnessAdjusting the DSP effect Adjusting input signalSwitching speaker mode Speaker Menu SettingsOpening the Speaker Menu Speaker parameters Setting speaker sizeUse the 2/3cursors to select Speaker Size Set speaker sizeAfter adjusting speaker levels Adjusting delay timeAdjust speaker level Adjusting delay timeChange source to DVD, and stop playback DVD Menu SettingsOpening the DVD Menu Choosing menu languageChoosing subtitle language On-screen guide settingsMove the pointer to Audio Language using Choosing audio languagePS Pan-scan Conversion Screen saver settingsSelect monitor type LB Letter Box ConversionLimiting playback by children Enter your 4-digit password using the number buttons 0 to To change the settingsTo temporarily release the Parental lock Label side How to handle discsMaintenance of discs Care and handling of discsConnections AV Compu Link Remote Control SystemTo Video input When system power is on Automatic Selection of TV’s Input ModeAutomatic Power On/Off Remote control of the TV and VCR using this remote controlRemote Control through the Remote Sensor on the center unit Compu Link Remote Control SystemAutomatic Source Selection To operate JVC’s video components using this remote control To operate JVC’s audio components using this remote controlOperating JVC’s Audio/Video Components TV VOL + Cassette deckMD recorder VCR10, 0, 100+ +10 Selects the channels Enter manufacturer’s code three digits using buttons 1 9,Release TV/CATV/DBS Power Try to operate your TV by pressing TV/CATV/DBS Power10, 0, 100+ +10 Selects the channel Enter manufacturer’s code three digits using buttons 1-9,Release VCR Power Try to operate your VCR by pressing VCR PowerProblem Possible Cause Solution TroubleshootingSatellite Speakers SP-XSA10 SpecificationsPowered Sub-woofer SP-PWA10 Center unit XV-THA10Appendix a Table of languages and their abbreviations Appendix B Country code list for parental lock Page HOW to Locate Your JVC Service Center Limited Warranty Consumer Video 0200TNMNATSAN

TH-A10 specifications

The JVC TH-A10 is a compact home theater system that delivers impressive sound performance coupled with stylish aesthetics. Designed for those who seek a cinematic experience at home without the bulk of a traditional audio setup, the TH-A10 provides a range of features that make it a standout option in the market.

One of the main highlights of the JVC TH-A10 is its robust sound output. The system includes a powerful subwoofer that enhances the bass response, ensuring that users can enjoy deep, resonant low frequencies that are essential for action movies and music genres like hip-hop and electronic. The satellite speakers, arranged in a surround sound configuration, provide a true immersive audio experience, allowing users to feel as if they are right in the middle of the action.

In terms of connectivity, the JVC TH-A10 is equipped with various input options, including HDMI and optical inputs, making it compatible with a wide range of devices such as Blu-ray players, gaming consoles, and streaming devices. This flexibility allows users to easily connect their preferred devices and enjoy high-quality audio without hassle.

The TH-A10 also supports advanced audio technologies, such as Dolby Digital and DTS, which enhance the overall sound experience by providing a more dynamic and enveloping soundstage. These formats are crucial for creating a lifelike audio experience that captures the nuances of soundtracks and environmental effects in movies and games.

In addition to its audio capabilities, the JVC TH-A10 is designed with user convenience in mind. The system includes a remote control that allows users to adjust settings, including volume and audio modes, from the comfort of their seating area. The sleek design of the speakers and subwoofer makes it easy to integrate into any home decor, ensuring that it enhances rather than detracts from the aesthetic of the room.

Moreover, the TH-A10 is energy-efficient, drawing minimal power while still delivering quality sound. This makes it an excellent choice for eco-conscious consumers who want to reduce their energy consumption without compromising on audio performance.

In conclusion, the JVC TH-A10 is a feature-packed home theater system that offers an excellent balance of performance, convenience, and design. With its ability to transform any room into a cinematic space, it is an ideal choice for movie buffs and music enthusiasts alike. Whether watching the latest blockbuster or enjoying a favorite playlist, the JVC TH-A10 delivers a sound experience that rivals that of larger, more cumbersome systems.
Top Page Image Contents