JVC TH-A10 Setting speaker size, Use the 2/3cursors to select Speaker Size, Set speaker size

Page 46
Speaker selection box
Press ENTER.
Note icon
Test tones will be played in the following order:
4.
See page 43, “Opening the SPEAKER MENU”.
2. Switch the speaker mode to EXPERT.
3. Move the pointer to TEST TONE using the 5/∞ cursors.
Open the SPEAKER MENU.
1.
SPEAKER MENU Settings
Playing a test tone
When you wish to play a test tone, make sure the sound mode is set to “SURROUND ON” or “THEATER.” The test tone will not play in other modes.

Left Front Speaker =Center Speaker =Right Front Speaker

±≠

Left Rear Speaker+Right Rear Speaker

•The note icon on the screen moves to the active speaker. On the center unit, the audio channel display lamp also moves to the active speaker, and the name of the active speaker appears in the display window, reflecting the configuration of the audio channel display lamps.

•The test tone is 6.

To stop the test tone, move the pointer to TEST TONE and press

ENTER.

Note:

•The test tone stops when the pointer moves from TEST TONE while the speaker selection box displays “SPEAKER SIZE” or “DELAY”.

Settings may be entered while the tone is sounded only if the speaker selection box displays “SPEAKER LEVEL”.

Setting speaker size

1. Open the SPEAKER MENU.

See page 43, “Opening the SPEAKER MENU”.

2. Switch the speaker mode to EXPERT.

3. Move the pointer to the speaker selection box using the 5/∞cursors.

Speaker selection box

44

4. Use the 2/3cursors to select SPEAKER SIZE.

Pressing the 2/3cursors toggles between the following settings.

jSPEAKER SIZEjSPEAKER LEVELjDELAYj

5. Set speaker size.

Use the 5/∞ cursors to move to the parameter you wish to set, then adjust the parameter with the 2/3cursors.

The Note icon on the screen indicates the selected speaker.

Note icon

Selected parameter

Speaker parameters —————————————

Speaker size

Select LARGE when the cone speaker imbedded in the speaker being used has a diameter of 12 cm or more.

Select SMALL when the diameter is less than 12 cm.

When using this system’s front, center, or rear speakers select SMALL for each.

Selecting LARGE may result in speaker damage.

F. SP

: Sets left and right front speaker size.

 

Pressing the 2/3 cursors toggles between the following

 

settings.

 

SMALL jLARGE

C. SP

: Sets center speaker size.

 

Pressing the 2/3cursors toggles between the following

 

settings.

 

When the F.SP is selected “SMALL”:

 

SMALL jOFF

 

When the F.SP is selected “LARGE”:

 

j SMALL jLARGE jOFF j

•Select OFF when the center speaker is not connected, or is not in use.

R.SP : Sets rear speaker size.

Pressing the 2/3cursors toggles between the following settings.

When the F.SP is selected “SMALL”: SMALL jOFF

When the F.SP is selected “LARGE”: j SMALL jLARGE jOFF j

•Select OFF when the rear speaker is not connected, or is not in use.

CROSS OVER : When using a small speaker with weak bass as a front, center, or rear speaker, you can redirect bass audio to the sub-woofer. Select a cross over frequency to match the size of the small speaker being used.

Pressing the 2/3cursors toggles between the following settings.

200Hz j100Hz j120Hz

Cross over frequency

Speaker diameter

100Hz

approx. 10 cm (4”)

120Hz

approx. 8 cm (3-3/16”)

200Hz

approx. 4 cm (1-5/8”)

BASS : BASS is fixed for SUBWOOFER. This cannot be selected with the pointer.

Page 45 Page 47
Image 46
Page 45 Page 47
Contents TH-A10 For U.S.A Table of Contents Getting Started Checking the supplied accessoriesSafety precautions Important cautionsRear left speaker System outlineCenter speaker SP-XCA10 Front left speaker Front right speakerSpeaker InstallationAdjusting the angle of the satellite speakers To hang satellite speakers from the wallDisc structure About discsPlayable disc types Video CDs with Playback Control functionAM antenna connections Connecting the TVConnections FM antenna connectionsTo connect speakers Connecting the rear and center speakersConneceting the front speakers Analog component connections Analog connectionsVideo component connections If your audio components have a Compu LINK-3 terminalDigital connections TV soundPlug the power cord into an AC outlet Connecting the power cordLight up the primary remote control buttons Center unit Power sub-wooferCenter unit Powered sub-wooferParts Identification Display windowRemote controls Primary remote controlOperation with the remote control Principles of operationOn-screen menu components To operate via the on-screen menuDisplaying the on-screen menu Basic operation with the on-screen menuOpening screens DVD Control display VCD Control display On-screen menus On-screen menus for using discsPreventing screen burn-out with Screen saver Screen Saver For DVDAdjusting volume To turn the system power supply On and OFF standbyTo turn TV power on and OFF Basic operationsChanging the source name Muting the soundSelecting the source to play Press one of the source selecting buttonsSelecting the analog or digital input Mode Changing the decode modeSub-woofer volume control Phase setting Adjusting the Input Signal LevelAudio channel display lamp Using the Sleep Timer Using the DSP ModesWhen selecting DAP Press DSP ModeBefore recording a digital source, turn off the DSP mode Press SurroundUsing the DVD player To play a discFast forward and rewind PausingLocating the beginning Press ¢or Resuming playbackSelecting playback from the DVD menu Press Resume during playbackVideo CD menu To specify the title or track number for PlaybackTo specify the time for playback To play from the beginning of a title Chapter, or trackTo specify the chapter number for Playback CHAP. Search Press DVD on ScreenPress Digest To select the screen for playback from Digest screen DigestSEARCH, then press Enter Use the number buttons 0~9 to enter the timeHold down FF/¢or 4/REW for more than 2 seconds To display Continuous Photos StrobeSlow-Motion Playback Slow Press Pause at the section you wish to view in slow motionZooming a scene Zoom Changing the Subtitle LanguageUse Cursor 2/3to select the desired audio language or sound Changing the audio channel AudioUse Cursor 5/∞to move the pointer Subutitle Use Cursor 5/∞to move the pointer to AudioSelecting an angle from the angle list display Use Cursor 2/3/5/∞to select the desired angle Press EnterSelecting a scene angle from the on-screen display NumberSelecting the Picture Character Or all tracks RepeatSampling all tracks Intro Use Cursor 5/∞to move the pointer toUse Cursor 5/∞to move the pointer to Time Select Programming the Playing Order Tracks ProgramUse Cursor 5/∞to move the pointer Program and press Enter Use Cursor 5/∞to move the pointer Random Random Play RandomPress Play to start program play Quitting programmed playbackTuning in stations manually Using preset tuningReceiving radio broadcasts Press FM Mode Selecting the FM reception modeWhen an FM stereo broadcast is hard to receive or noisy Beat cutMain Menu Performing miscellaneous settingsDVD settings on-screen display Sound Menu Speaker MenuSetting the Sleep Timer Main Menu SettingsOpening the Main Menu When the source is DVD Changing the DSP ModeAdjusting the volume When the source is not DVD or TunerUsing loudness Sound Menu SettingsAdjusting the balance Opening the Sound MenuAdjusting input signal Adjusting the DSP effectSwitching speaker mode Speaker Menu SettingsOpening the Speaker Menu Set speaker size Setting speaker sizeUse the 2/3cursors to select Speaker Size Speaker parametersAdjusting delay time Adjusting delay timeAdjust speaker level After adjusting speaker levelsChoosing menu language DVD Menu SettingsOpening the DVD Menu Change source to DVD, and stop playbackChoosing audio language On-screen guide settingsMove the pointer to Audio Language using Choosing subtitle languageLB Letter Box Conversion Screen saver settingsSelect monitor type PS Pan-scan ConversionLimiting playback by children Enter your 4-digit password using the number buttons 0 to To change the settingsTo temporarily release the Parental lock Care and handling of discs How to handle discsMaintenance of discs Label sideConnections AV Compu Link Remote Control SystemTo Video input Remote control of the TV and VCR using this remote control Automatic Selection of TV’s Input ModeAutomatic Power On/Off When system power is onRemote Control through the Remote Sensor on the center unit Compu Link Remote Control SystemAutomatic Source Selection To operate JVC’s video components using this remote control To operate JVC’s audio components using this remote controlOperating JVC’s Audio/Video Components VCR Cassette deckMD recorder TV VOL +Try to operate your TV by pressing TV/CATV/DBS Power Enter manufacturer’s code three digits using buttons 1 9,Release TV/CATV/DBS Power 10, 0, 100+ +10 Selects the channelsTry to operate your VCR by pressing VCR Power Enter manufacturer’s code three digits using buttons 1-9,Release VCR Power 10, 0, 100+ +10 Selects the channelTroubleshooting Problem Possible Cause SolutionCenter unit XV-THA10 SpecificationsPowered Sub-woofer SP-PWA10 Satellite Speakers SP-XSA10Appendix a Table of languages and their abbreviations Appendix B Country code list for parental lock Page HOW to Locate Your JVC Service Center Limited Warranty Consumer Video 0200TNMNATSAN

TH-A10 specifications

The JVC TH-A10 is a compact home theater system that delivers impressive sound performance coupled with stylish aesthetics. Designed for those who seek a cinematic experience at home without the bulk of a traditional audio setup, the TH-A10 provides a range of features that make it a standout option in the market.

One of the main highlights of the JVC TH-A10 is its robust sound output. The system includes a powerful subwoofer that enhances the bass response, ensuring that users can enjoy deep, resonant low frequencies that are essential for action movies and music genres like hip-hop and electronic. The satellite speakers, arranged in a surround sound configuration, provide a true immersive audio experience, allowing users to feel as if they are right in the middle of the action.

In terms of connectivity, the JVC TH-A10 is equipped with various input options, including HDMI and optical inputs, making it compatible with a wide range of devices such as Blu-ray players, gaming consoles, and streaming devices. This flexibility allows users to easily connect their preferred devices and enjoy high-quality audio without hassle.

The TH-A10 also supports advanced audio technologies, such as Dolby Digital and DTS, which enhance the overall sound experience by providing a more dynamic and enveloping soundstage. These formats are crucial for creating a lifelike audio experience that captures the nuances of soundtracks and environmental effects in movies and games.

In addition to its audio capabilities, the JVC TH-A10 is designed with user convenience in mind. The system includes a remote control that allows users to adjust settings, including volume and audio modes, from the comfort of their seating area. The sleek design of the speakers and subwoofer makes it easy to integrate into any home decor, ensuring that it enhances rather than detracts from the aesthetic of the room.

Moreover, the TH-A10 is energy-efficient, drawing minimal power while still delivering quality sound. This makes it an excellent choice for eco-conscious consumers who want to reduce their energy consumption without compromising on audio performance.

In conclusion, the JVC TH-A10 is a feature-packed home theater system that offers an excellent balance of performance, convenience, and design. With its ability to transform any room into a cinematic space, it is an ideal choice for movie buffs and music enthusiasts alike. Whether watching the latest blockbuster or enjoying a favorite playlist, the JVC TH-A10 delivers a sound experience that rivals that of larger, more cumbersome systems.
Top Page Image Contents