JVC TH-A10 manual Adjusting delay time, Adjust speaker level, Stop test tone playback

Page 47
See page 43, “Opening the SPEAKER MENU”.
2. Switch the speaker mode to EXPERT.
3. Move the pointer to the speaker selection box using the 5/∞cursors.
Use the 2/3cursors to select SPEAKER LEVEL.
Open the SPEAKER MENU.
1.
Setting speaker level

Pressing the 2/3cursors switches between the following settings.

jSPEAKER SIZEjSPEAKER LEVELjDELAYj

4. Play a test tone (only when the DSP mode is set to “SURROUND ON” or “THEATER”).

Using the 5/∞ cursors, move the pointer to TEST TONE and press ENTER.

Note:

•The speaker level can be set without playing a test tone.

•Speakers with speaker size set to OFF will not play a test tone.

5.Adjust speaker level.

Use the 5/∞cursors to move the pointer to the parameter you wish to set. Then adjust the level using the 2/3cursors.

The Note icon on the screen indicates the selected speaker.

Note icon

 

Adjustable

 

parameters

C.SP

: Adjust center speaker level.

R.L. SP

: Adjust left rear speaker level.

R.R. SP

: Adjust right rear speaker level.

SUB WOOFER

: Adjust sub-woofer level.

•Each speaker level can be adjusted from –10 dB to +10 dB.

•Speakers marked with a “ – – “cannot be adjusted.

•The F. SP (Front Speaker) level cannot be adjusted.

•You can save center speaker and rear speaker adjustments for each DSP mode and save them in memory.

After adjusting speaker levels

6. Stop test tone playback.

Use the 5/∞cursors to move the pointer to TEST TONE and press ENTER.

SPEAKER MENU Settings

Adjusting delay time

The delay time for the center speaker and rear speakers is calculated by comparing the distance between the rear/center speakers and the listening point with the distance between the front speakers and the listening point.

1. Open the SPEAKER MENU.

See page 43, “Opening the SPEAKER MENU”.

2. Switch the speaker mode to EXPERT.

3. Move the pointer to the speaker selection box using the 5/∞cursors.

Use the 2/3cursors to select DELAY.

Pressing the 2/3cursors switches between the following settings.

jSPEAKER SIZEjSPEAKER LEVELjDELAYj

4. Adjusting delay time.

Use the 5/∞cursors to move the pointer to the parameter you wish to set. Then adjust the delay time using the 2/3cursors. The Note icon on the screen indicates the selected speaker.

Note icon

– –

Adjustable parameters

C. SP : Adjusts the center speaker delay time. Delay time can be set between 0 ms and 5 ms.

When the distance between the listening point and the center speaker is close to the distance to the front speakers, set the delay time to 0 ms. Increase the delay time when the distance to the center speaker is shorter.

•A 1ms increase/decrease of delay time is equivalent to a 30 cm change in distance.

R.SP : Adjusts the rear speaker delay time.

Delay time can be set between 0 ms and 15 ms. When the distance between the listening point and the rear speakers is close to the distance to the front speakers, set the delay time to 0ms. Increase the delay time when the distance to the rear speakers is shorter.

•A 1ms increase/decrease of delay time is equivalent to a 30 cm change in distance.

•Speakers marked with a “ – – “ cannot be adjusted.

•“CROSS OVER” has the same effect as setting with “SPEAKER SIZE”.

45

Page 46 Page 48
Image 47
Page 46 Page 48
Contents TH-A10 For U.S.A Table of Contents Important cautions Checking the supplied accessoriesSafety precautions Getting StartedFront right speaker System outlineCenter speaker SP-XCA10 Front left speaker Rear left speakerTo hang satellite speakers from the wall InstallationAdjusting the angle of the satellite speakers SpeakerVideo CDs with Playback Control function About discsPlayable disc types Disc structureFM antenna connections Connecting the TVConnections AM antenna connectionsConneceting the front speakers Connecting the rear and center speakersTo connect speakers If your audio components have a Compu LINK-3 terminal Analog connectionsVideo component connections Analog component connectionsTV sound Digital connectionsCenter unit Power sub-woofer Connecting the power cordLight up the primary remote control buttons Plug the power cord into an AC outletDisplay window Powered sub-wooferParts Identification Center unitPrimary remote control Remote controlsPrinciples of operation Operation with the remote controlBasic operation with the on-screen menu To operate via the on-screen menuDisplaying the on-screen menu On-screen menu componentsFor DVD On-screen menus On-screen menus for using discsPreventing screen burn-out with Screen saver Screen Saver Opening screens DVD Control display VCD Control displayBasic operations To turn the system power supply On and OFF standbyTo turn TV power on and OFF Adjusting volumePress one of the source selecting buttons Muting the soundSelecting the source to play Changing the source nameChanging the decode mode Selecting the analog or digital input ModeAudio channel display lamp Adjusting the Input Signal LevelSub-woofer volume control Phase setting Using the DSP Modes Using the Sleep TimerPress Surround Press DSP ModeBefore recording a digital source, turn off the DSP mode When selecting DAPTo play a disc Using the DVD playerLocating the beginning PausingFast forward and rewind Press Resume during playback Resuming playbackSelecting playback from the DVD menu Press ¢orTo specify the title or track number for Playback Video CD menuPress DVD on Screen To play from the beginning of a title Chapter, or trackTo specify the chapter number for Playback CHAP. Search To specify the time for playbackUse the number buttons 0~9 to enter the time To select the screen for playback from Digest screen DigestSEARCH, then press Enter Press DigestPress Pause at the section you wish to view in slow motion To display Continuous Photos StrobeSlow-Motion Playback Slow Hold down FF/¢or 4/REW for more than 2 secondsChanging the Subtitle Language Zooming a scene ZoomUse Cursor 5/∞to move the pointer to Audio Changing the audio channel AudioUse Cursor 5/∞to move the pointer Subutitle Use Cursor 2/3to select the desired audio language or soundNumber Use Cursor 2/3/5/∞to select the desired angle Press EnterSelecting a scene angle from the on-screen display Selecting an angle from the angle list displayOr all tracks Repeat Selecting the Picture CharacterUse Cursor 5/∞to move the pointer to Sampling all tracks IntroUse Cursor 5/∞to move the pointer Program and press Enter Programming the Playing Order Tracks ProgramUse Cursor 5/∞to move the pointer to Time Select Quitting programmed playback Random Play RandomPress Play to start program play Use Cursor 5/∞to move the pointer RandomReceiving radio broadcasts Using preset tuningTuning in stations manually Beat cut Selecting the FM reception modeWhen an FM stereo broadcast is hard to receive or noisy Press FM ModeSound Menu Speaker Menu Performing miscellaneous settingsDVD settings on-screen display Main MenuOpening the Main Menu Main Menu SettingsSetting the Sleep Timer When the source is not DVD or Tuner Changing the DSP ModeAdjusting the volume When the source is DVDOpening the Sound Menu Sound Menu SettingsAdjusting the balance Using loudnessAdjusting the DSP effect Adjusting input signalOpening the Speaker Menu Speaker Menu SettingsSwitching speaker mode Speaker parameters Setting speaker sizeUse the 2/3cursors to select Speaker Size Set speaker sizeAfter adjusting speaker levels Adjusting delay timeAdjust speaker level Adjusting delay timeChange source to DVD, and stop playback DVD Menu SettingsOpening the DVD Menu Choosing menu languageChoosing subtitle language On-screen guide settingsMove the pointer to Audio Language using Choosing audio languagePS Pan-scan Conversion Screen saver settingsSelect monitor type LB Letter Box ConversionLimiting playback by children To temporarily release the Parental lock To change the settingsEnter your 4-digit password using the number buttons 0 to Label side How to handle discsMaintenance of discs Care and handling of discsTo Video input AV Compu Link Remote Control SystemConnections When system power is on Automatic Selection of TV’s Input ModeAutomatic Power On/Off Remote control of the TV and VCR using this remote controlAutomatic Source Selection Compu Link Remote Control SystemRemote Control through the Remote Sensor on the center unit Operating JVC’s Audio/Video Components To operate JVC’s audio components using this remote controlTo operate JVC’s video components using this remote control TV VOL + Cassette deckMD recorder VCR10, 0, 100+ +10 Selects the channels Enter manufacturer’s code three digits using buttons 1 9,Release TV/CATV/DBS Power Try to operate your TV by pressing TV/CATV/DBS Power10, 0, 100+ +10 Selects the channel Enter manufacturer’s code three digits using buttons 1-9,Release VCR Power Try to operate your VCR by pressing VCR PowerProblem Possible Cause Solution TroubleshootingSatellite Speakers SP-XSA10 SpecificationsPowered Sub-woofer SP-PWA10 Center unit XV-THA10Appendix a Table of languages and their abbreviations Appendix B Country code list for parental lock Page HOW to Locate Your JVC Service Center Limited Warranty Consumer Video 0200TNMNATSAN

TH-A10 specifications

The JVC TH-A10 is a compact home theater system that delivers impressive sound performance coupled with stylish aesthetics. Designed for those who seek a cinematic experience at home without the bulk of a traditional audio setup, the TH-A10 provides a range of features that make it a standout option in the market.

One of the main highlights of the JVC TH-A10 is its robust sound output. The system includes a powerful subwoofer that enhances the bass response, ensuring that users can enjoy deep, resonant low frequencies that are essential for action movies and music genres like hip-hop and electronic. The satellite speakers, arranged in a surround sound configuration, provide a true immersive audio experience, allowing users to feel as if they are right in the middle of the action.

In terms of connectivity, the JVC TH-A10 is equipped with various input options, including HDMI and optical inputs, making it compatible with a wide range of devices such as Blu-ray players, gaming consoles, and streaming devices. This flexibility allows users to easily connect their preferred devices and enjoy high-quality audio without hassle.

The TH-A10 also supports advanced audio technologies, such as Dolby Digital and DTS, which enhance the overall sound experience by providing a more dynamic and enveloping soundstage. These formats are crucial for creating a lifelike audio experience that captures the nuances of soundtracks and environmental effects in movies and games.

In addition to its audio capabilities, the JVC TH-A10 is designed with user convenience in mind. The system includes a remote control that allows users to adjust settings, including volume and audio modes, from the comfort of their seating area. The sleek design of the speakers and subwoofer makes it easy to integrate into any home decor, ensuring that it enhances rather than detracts from the aesthetic of the room.

Moreover, the TH-A10 is energy-efficient, drawing minimal power while still delivering quality sound. This makes it an excellent choice for eco-conscious consumers who want to reduce their energy consumption without compromising on audio performance.

In conclusion, the JVC TH-A10 is a feature-packed home theater system that offers an excellent balance of performance, convenience, and design. With its ability to transform any room into a cinematic space, it is an ideal choice for movie buffs and music enthusiasts alike. Whether watching the latest blockbuster or enjoying a favorite playlist, the JVC TH-A10 delivers a sound experience that rivals that of larger, more cumbersome systems.
Top Page Image Contents