Rowenta DZ9030 manual Environment protection first, Keep these instructions, Before USE, Unpacking

Page 6

the appliance is obviously leaking. In these cases the appliance should be returned to an approved Rowenta Customer Service Centre for repair. (See enclosed Service Centre addresses.) Repairs to electrical appliances may only be carried out by specialists. Improperly carried out repairs can cause serious danger to users. To avoid danger to users, a defective or damaged supply cord may only be replaced by an authorised Rowenta Customers Service Centre .

This product has been designed for domestic use only. Any commercial use, inappropriate use or failure to comply

with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.

Environment protection first !

Your appliance contains valuable materials which can be recovered or recycled.

Leave it at a local civic waste collection point.

Keep these instructions

BEFORE USE

1 • Unpacking

Take the iron out of the box and remove all the stickers.

IMPORTANT Before doing anything else, remove the soleplate protector (fig.1)!

2 • What water may be used ?

Your iron has been designed to operate using untreated tap water up to 17° dH (German water hardness) or 3 mmol/liter. However, if your water is very hard, you can mix 50% untreated tap water with 50% distilled or demineralised water.

IMPORTANT Heat concentrates the elements contained in water during evaporation. The type of water listed below

4

Image 6
Contents SLO 3a 3b 3c 3d 11b 11a* 11c 11d No OK Page Safety Instructions DescriptionBefore USE Environment protection firstKeep these instructions UnpackingUSE Using for the first timeSetting the temperature Filling the water tankDry ironing YellowShot of Steam Steam ironingHigh Pressure Steam Vertical shot of steamMaintenance and Cleaning After USECleaning the iron PROBLEMS?Problems Cause Solution Descaling agents To the water in the water tank