DG580 model: Press both on/off switches (A) and (B) so that the iron light and steam indicator light turn on.
(B)
(A)
2.When the steam indicator light turns off (approximately 7 minutes), steam is ready.
3.During ironing the temperature indicator light for the iron and the steam indicator light will turn on and off. This is normal as the temperature is being regulated. The unit is still on when these lights go out.
4.To turn the unit off, press the switch(es) in the opposite direction so that the side without the light is depressed. Unplug and leave to cool completely before emptying or putting away. Set the temperature control dial on the iron to the minimum setting before unplugging.
STEAM IRONING
Warning: Never iron or steam clothes while they are being worn.
DG 560
1.Set the iron’s temperature control dial according to the type of fabric being ironed.Check the fabric’s label for appropriate setting and steam recommendations.
Fabric | Temperature |
| regulator |
synthetics | ● |
e.g. viscose, | (low temperature) |
polyester |
|
silk, | ● ● |
wool | (medium temperature) |
cotton, | ● ● ● |
linen | (high temperature) |
2.Once the iron has heated to the proper temperature and the boiler is ready, the temperature indicator light and steam indicator light will go out. The iron is now ready for use.
3.To obtain steam press the steam button beneath the iron handle. When you release the button, steam will stop. We recommend pressing and releasing the steam button at regular intervals of 15 seconds.
With delicate fabrics (● setting), press the steam button under that handle intermittently rather than continuously. This will avoid water droplets from appearing with the steam.