Selecting the temperature
Set the thermostat control dial (A) according to the type of fabric you are ironing. Check the fabric label for the appropriate setting.
Fabric | Temperature |
| regulator |
|
|
synthetics |
|
nylon | ● |
polyester | (low temperature) |
silk | ●● |
wool | (medium temperature) |
cotton | ●●● |
linen | (high temperature) |
m
i n
Start at low temperature ● and graduate to high temperature ● ● .●For delicate fabrics we recommend carrying out a test on an unobtrusive part of the garment (inner seam). Steam can only be produced when the thermostat is aligned to ● ● ●setting.
STEAMBRUSH FUNCTION
Using for the first time
When the Steam 'n Press is plugged
!in the soleplate heats. Do not touch
or remove the soleplate cover without letting the soleplate cool down.
n i
m
Make sure soleplate cover is securely in place before using the steambrush function. Please reference section in instructions called “Attaching the Soleplate Cover“.
Plug in your Steam 'n Press and set the thermostat to the ●●● steam setting.
After approximately one minute it will reach working temperature.
To begin steaming, press the burst of steam button 4 to 5 times to prime the unit.
NOTE: The Steam 'n Press can be used on virtually all articles of clothing in the home. Care should be taken when steaming heat sensitive synthetic materi- als such as nylon or rayon. We recommend you test acrylic, nylon or other synthetic fabrics on an unobtrusive area to ensure these fabrics are not damaged by hot steam.
8