Morphy Richards ELITE PRO, ELITE S manual Before use, Filling, Re-filling ‘in use’, Steam ironing

Page 7

42288 rev4 14/3/08 11:14 Page 7

WARNING: Do not use the product on a surface which could be damaged by heat or steam such as a worktop or a polished wood surface.

If in doubt, contact Morphy

Richards.

Before use

Remove any protective sticker from the soleplate and the base unit, if any.

Unwind and straighten the power cord à and supply cord ß.

Slide out the water tank á and fill (see filling instructions).

When ironing with the temperature set at 2-dot setting, the steam output should be set at the lower end of the steam range.

Textiles and clothes are supposed to carry ironing instructions. If they don’t, you should follow the fabric guide on page 3, but be sure to test the temperature by ironing the hem of the garment or similar area first.

If you turn the control dial down from a hot setting to a cooler setting, wait until the iron temperature has stabilised before you continue ironing.

FILLING

1Place the steam generator on a stable ironing board or table, with the iron resting on it’s stand.

2Release the detachable water tank by operating the tank release knob ã.

3Slide the tank outward.

4Fill the tank to the ‘fill to here’ line with clean tap water A.

Never use battery topping up fluid or water containing any substances like starch or sugar, or defrosted water from a refrigerator.

5Re-position the water tank on the base unit and push securely into place. Please make sure the tank is secure B.

6Always pour out any remaining water after use.

 

Re-filling ‘in use’

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

The low water indicator light æ will

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

flash and a beep sound will be

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

heard. This is a warning to stop

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ironing and fill the tank. Ironing can

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

continue for a short period, then the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

generator will shut down until the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

tank is refilled.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Refilling can be done whilst the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

appliance is in operation. It is not

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A

 

 

 

 

 

 

 

 

 

 

 

 

necessary to wait for the appliance

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to cool down.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Unlock the tank using the tank

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

release knob ã. Slide out the water

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

tank and fill (see filling instructions).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

Alternatively, you can re-fill the tank

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

in ‘situ’ through the filler â.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Steam ironing

1Connect the appliance to a suitable mains outlet. Press the power ‘ON’ button ç which will glow red.

ALL MODELS

After a few minutes, the light changes to green - indicating the boiler is ready to generate steam.

Check the iron temperature indicator B light Û has switched off, indicating

the iron is ready to use.

MODELS WITH VARIABLE STEAM 42288, 42297, 42298 & 42299

This model automatically selects the middle steam setting as the default setting.

To select a different steam setting, press the steam button ë to select the desired steam level.

2Turn the temperature dial Ý on the iron in a clockwise direction, select dot-1, dot-2 or dot-3 according to the recommendation of the garment label.

3The iron’s temperature indicator light Û goes off when the required temperature is reached.

7

7

Image 7
Contents Jet Stream ‘Elite’, ‘Elite S’, ‘Elite+’ & ‘Elite Pro’ Important Safety Instructions Electrical Requirements Temperature guideInstructions for USE Iron unit Jetstream ‘ELITE’ 42286 & ‘ELITE PRO’ÆÜ Ý Base unit Water spray unit Jetstream ‘ELITE S’Components of Your Jetstream ‘ELITE S’ ÎÞ ï Ú ÛComponents of Your Jetstream ‘ELITE+’ & ‘ELITE PRO’ Jetstream ‘ELITE+’ & ‘ELITE PRO’ 42288, 42297, 42298Steam ironing Before useFilling Re-filling ‘in use’ANTI-SCALE System Models with Spray FeatureMaintenance Features Your Steam GeneratorHelpline Exclusions Your TWO Year GuaranteeModel no Serial no