Morphy Richards ELITE PRO, ELITE S manual Features Your Steam Generator, Maintenance, Helpline

42288 rev4 14/3/08 11:14 Page 9

Replacing anti- scale medium D

1When the indicator light å flashes, you need to replace the anti-scale cartridge è.

2The steam generator needs to be connected to the mains supply.

3Remove the tank from the base unit.

4Remove the anti-scale cartridge which is situated behind the tank, and replace the cartridge, making sure the replacement unit is pushed firmly in position.

5Re-position the tank.

6If the cartridge is not fitted correctly, the unit will not function. The ‘calc’ light å will flash, accompanied by a beep sound.

Re-fit the cartridge and the unit will operate as intended.

Note: A cartridge should filter 40 litres of hard water.

Replacement anti-scale refills

To obtain replacement anti- scale refills, telephone our spares number on: 0844 873 0719.

•If a new re-fill is not available, you may continue operating the appliance, but scale will build up in the system. Replace the anti-scale refill as soon as possible.

Part Number 01030.

FEATURES OF

YOUR STEAM

GENERATOR

Steam function

temperature (the indicator light	D
	Cartridge
on the iron goes out when
ready).
Sudden jolts of the boiler unit
can also cause water droplets
on the soleplate; therefore, do
not move the base unit during
ironing. We recommend for the
first time ironing that you iron
over an old towel.

Vertical steam
Hold the iron in a vertical
position between 1cm and 2cm
			Drawer
away from the item E. Press
the steam trigger Ú, this will
create vertical steam. This
feature is especially useful for				E
removing creases from hanging
clothes, curtains, wall hangings.
MAINTENANCE
To clean a stainless steel
soleplate
To keep the soleplate of your
iron clean and free of limescale,
we recommend that you use
one of the gentle chrome, silver
or stainless steel cleaners that		HELPLINE
are generally available. Always
follow the manufacturer’s		If you have any difficulty with
instructions. To clean off melted
man-made fibres, set the iron		your appliance, do not hesitate
at 3-dot position and pass it		to call us.
over a clean piece of cotton		We are more likely to be able to
which will draw the deposit off
the surface.		help than the store from where
To clean a coated soleplate		you bought it.
		Please have the following
In the unlikely event of any		information ready to enable our
man-made fibre fusing to the		staff to deal with your query
soleplate, set the iron at the		quickly.
3- dot position and pass it over	• Name of the product
a clean piece of cotton, this will
draw the deposit off the	• Model number as shown on the
surface.
Do not use scouring powder or		underside of the appliance.
	• Serial number as shown on
solution, as this could cause
damage to the coating.		underside of the appliance.

During the steaming process, small amounts of water may be ejected from the soleplate. This is normal and can be avoided by using the steam for short amounts of time and only when the iron is at the correct

To clean the exterior

Allow the steam generator to cool and wipe over with a damp cloth and mild detergent, then wipe with a dry cloth.

UK Helpline 0844 871 0953

Replacement Parts 0844 873 0719

Ireland Helpline 1800 409 119

9