RN42221MUK Rev4_IB 02/07/2013 15:22 Page 4
Temperature guide
Heat setting markings on the temperature dial of all Morphy Richards irons match those of the International Textile Care Labelling Code
Symbol |
| (120°C Max) Cool | (160°C Max) Warm | (210°C Max) Hot | MAX setting |
Control dial | Do not iron | • | •• | ••• |
|
positions |
|
|
|
|
|
Steam level setting |
| No steam | Low | Medium / High | High |
(see step 4 of |
| (see ‘Dry ironing’ |
|
|
|
‘Using the Steam |
| on page 6) |
|
|
|
Generator for |
|
|
|
|
|
steam ironing’ on |
|
|
|
|
|
page 5) |
|
|
|
|
|
Fabric | Nylon, Acetates, | Wool, Polyester | Cotton, Linen |
| synthetic fabrics | mixtures | Rayon, Rayon |
|
|
| mixtures |
|
|
|
|
Ironing | Iron on wrong side, |
| Fabrics requiring |
| if moisture |
| this setting usually |
| required, use |
| require steam |
| damp cloth |
| pressing. |
| (not Acetate) |
|
|
|
|
|
|
Steaming |
|
|
|
|
|
|
|
Without steam |
|
|
|
|
|
|
|
Location
Locate the steam generator horizontally on the iron rest plate of your ironing board (if large enough) or on a heat resistant stand at the same height as your ironing board or below it. Always ensure the steam generator is on a firm surface when ironing.
WARNING: Do not use the product on a surface which could be damaged by heat or steam such as a worktop or a polished wood surface.
If in doubt, contact Morphy Richards.
4
Before use
Remove any protective cover from the soleplate
(4)and the base unit, if any.
Unwind and straighten the power cord (24) and steam supply cord (23).
Textiles and clothes should carry ironing instructions. If not, follow the temperature guide above, but test the temperature by ironing the hem of the garment or similar discreet area first.
It is advised to begin with ‘cool’ fabrics and work up to higher settings. An iron heats up quicker than it cools down so you’ll save time and electricity.
If you turn the temperature dial down from a hot setting to a cooler setting, wait until the iron temperature has stabilised before you continue ironing.
NOTE: Hold the base with both hands when handling and moving the unit, as the water tank is detachable.