40513 rev1:RN40513 MUK Rev1 18/02/2009 11:16 Page 3
•It is recommended that you use up one beaker of water by operating your iron’s steam and shot of steam functions before ironing any clothes, as some dripping may occur while your iron’s steam system is activated.
ELECTRICAL REQUIREMENTS
Check that the voltage on the rating plate of your appliance corresponds with your house electricity supply which must be A.C. (Alternating Current).
If the socket outlets in your home are not suitable for the plug supplied with this appliance, the plug should be removed and the appropriate one fitted.
WARNING: The plug removed from the mains lead, if severed, must be destroyed, as a plug with a bared flexible cord is hazardous if engaged into a live socket outlet.
Should the fuse in the 13 amp plug require changing, a 13 amp BS1362 fuse must be fitted.
WARNING: This appliance must be earthed.
INSTRUCTIONS FOR USE
Temperature guide
Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of the International Textile Care Labelling Code.
Symbol |
|
|
|
| (120°C Max) Cool | (160°C Max) Warm | (210°C Max) Hot |
Control knob | Do not iron |
|
|
positions | at all |
|
|
Fabric | Nylon, Acetates | Wool, Polyester | Cotton, Linen |
| e.g. Acrilan | mixtures e.g. | Rayon, Rayon |
| Courtelle, Orlon | Polyester/Cotton | mixtures, |
| Triacetates, e.g. |
| e.g. Rayon/Linen |
| Tricel/Polyester |
|
|
Ironing | Iron on wrong side |
| if moisture required |
| use damp cloth |
| (Not Acetate) |
Fabrics requiring this setting usually require steam pressing for heavy cotton, denim etc.
With water in tank |
| Dry and spray |
|
|
|
|
| Steam/spray/shot of steam |
|
| |
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
Without water in tank |
|
|
|
| Dry ironing |
|
| ||||
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
For details of other Morphy Richards products, please see our website: | 3 |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|