operation
Filling the iron with water
NOTE: This iron has been designed to work with ordinary tap water; however, if you live in an area with hard water, we recommend the use of distilled water. Chemically softened water (e.g. from household water softeners) is not recommended and may cause the iron to leak or spit.
•Ensure the iron is unplugged from the the wall outlet.
•Place the iron on its soleplate (14) on a flat, dry and level surface.
•Press the function knob 
(4) to open the fill inlet cover (2) (ill. a ).
•Use the supplied measuring cup (15) and fill the water reservoir (12) through the fill inlet (3) until the MAX fill level on the reservoir (12) is reached (ill. b ).
•Close the fill inlet cover (2) (ill. c ).
•Hold the iron horizontally and move back and forth for about 30 seconds (
Anti- calc system).
Setting the temperature
NOTE: Always follow the ironing instructions attached to the fabric. Please refer to the fabric setting chart on the following page if there should be no ironing instructions on the fabric.
•If the fabric consists of a mixture of fibers, set the iron according to the fiber that requires the lowest temperature.
•Connect the iron to a suitable wall outlet.
•
and 
appear on the fabric setting display (7). 
flashes in blue slowly. Meanwhile, the
•Place the iron on its heel (10) on a level surface (ill. d ).
•Press the fabric setting button (7) repeatedly, until the desired setting is displayed (
Fabric setting chart). The
•Allow the iron to heat up.
•After the set temperature is reached, the fabric setting display (7) and the color- changing indicator (13) stop flashing and light up continuously in the corresponding color.
•The buzzer beeps once.
•The iron is ready for use.
7
1/11/10 9:59 AM |