GE 169233 manual Water spray, Steam burst, Vertical steam ironing

Page 9

operation

Turn the function knob (4) to the desired steam output. Turn right/left to increase/ decrease the steam output. Steam is kept at a constant temperature.

After use, turn the function knob (4) left to the dry ironing position (ill. g ).

Press the fabric setting button (7), until is displayed. Disconnect the iron from the wall outlet.

Let the iron cool completely, and remove water ( Turning the iron off and emptying the water reservoir).

Store the iron on its heel (10) in a safe place ( Storage).

Water spray

NOTE: Water spray can be used to help iron heavy fabrics or difficult areas (collars, pockets, sleeves, creases, etc). It can also be used when ironing delicate fabrics, which cannot be steam ironed.

Set the temperature ( Fabric setting chart).

Aim the spray nozzle (1) at the garment and then press the spray button (5).

• A spray of water is emitted from the spray nozzle (1) (ill. f ).

NOTE: Spray function only works when water has been filled into the reservoir (12). If the spray is being used for the first time, or if the iron has been standing for some time,

you may need to press the spray

button (5) a few times to prime the spray pump

before it works correctly.

 

Steam burst

NOTE: This function provides an extra amount of steam to remove stubborn creases. For extra stubborn creases, wait a few seconds before pressing the steam burst button (6) again. Most creases can be removed within three bursts of steam.

Set the temperature ( Setting the temperature).

Press the steam burst button (6).

A burst of steam is released from the nozzles in the soleplate (14) (ill. h ). NOTE: The iron might be too hot for some fabrics when using the steam setting.

Vertical steam ironing

NOTE: This function provides an extra amount of steam to remove creases on delicate garments in a hanging position, hanging curtains or other hanging fabrics.

Prepare the iron for steam ironing ( Steam ironing).

Hold the iron about 6 inches away from the fabric to be ironed.

Press the steam burst button (6). Now, steam bursts out and penetrates into the fabric to remove creases (ill. i ).

9

Iron-169233-05 (GB).indd 9

1/11/10 9:59 AM

Image 9
Contents Easy set iron with color response Read all instructions before using Important safeguardsOther Consumer Safety Information ParTS Illustrations Color-changing indicator and buzzer signal OperationBefore first use Filling the iron with water Setting the temperatureSteam ironing Fabric setting chartWater spray Steam burstVertical steam ironing Anti-drip function Dry ironingTurning the iron off and emptying the water reservoir Auto shut-off functionCleaning the iron Cleaning and maintenanceAnti-calc system StorageProblem Cause TroubleshOotingTechnical daTA Customer Assistance Two-year limited warranty