Getting started
TV
Supplied composite video cord
Main unit
COMPONENT VIDEO
Y PB PR
VIDEO OUT
You can enjoy pictures of better quality using the following cord instead of the supplied video cord.
Connecting by using the S-Video cord
Main unit | TV | |
supplied) |
| |
|
| |
COMPONENT VIDEO |
|
|
Y PB PR |
|
|
VIDEO OUT
Connecting by using the component video cord
You can enjoy better quality pictures than when using the
TV
Component video cord (not supplied)
Blue
Green
Red
COMPONENT VIDEO
Y PB PR
VIDEO OUT
Main unit
CAUTION
Use either the
NOTE
•In order to enjoy pictures with Progressive mode (page 26), the TV is required to have Progressive video input.
•If the component video input jacks of your TV are BNC type, use a plug adapter (not supplied) to convert the plugs.
Connecting the power cord
AC outlet
Supplied power cord | Main unit |
•Connect the power cord after all other connections are complete.
•The STANDBY lamp (on the front panel) will be lit.
Selecting an AM interval spacing
You can change the AM interval spacing.
Some countries space AM stations 9 kHz apart, and some countries use 10 kHz spacing.
•Before doing the following procedure, select AM as source, then turn off the unit.
•Use the buttons on the main unit.
To set the AM tuner to the 10 kHz spacing:
While holding ¢, press
STANDBY/ON .
To set the AM tuner to the 9 kHz spacing:
While holding 4, press
STANDBY/ON .
Changing the color system
You can select the video output to match it to the color system of your TV (PAL or NTSC).
1Press and hold VFP for 4 seconds while the system is turned off (on standby).
2Press cursor 2/3 to select the video output. Press ENTER to set the video output.
11