Product may vary slightly from what is illustrated.
How to Use
This appliance is intended for household use only.
GETTING STARTED
X
A
M
AUTO CLEAN
•Remove any labels, stickers or tags attached to the body or soleplate of the iron.
•Please go to www.prodprotect.com/applica to register your warranty.
Note: Use ordinary tap water for ironing. Do not use water processed through a home softening system.
Important: For optimum performance, let the iron stand for 90 seconds before beginning to iron.
Filling Water Tank
1. Open the
A
ENGLISH
2.Tilt the iron and using a clean measuring cup, pour water into opening until the water reaches the MAX level mark on the water tank (B). Do not overfill.
3.Close the
| Note: If you need to add water while ironing, unplug the iron | |
B | and follow above steps. | |
4. Plug in the iron. The iron beeps and digital display | ||
MAX | ||
| illuminates green. |
Selecting Temperature
1. | Spray nozzle |
2. | |
3. | Digital display |
4. | Steam button |
5. | Spray button |
6. | Comfort Grip® handle |
7. | Change language button (not shown) |
8. | 360° pivoting cord |
9. | Smart stand/cord wrap |
10. | AUTO CLEAN® button |
Symbols
Surge of steam
Spray
Dry
1. Read garment's label to help you determine fabric type.
Tip: If unsure of a garment's fiber, test a small area (on an inside seam or hem) before ironing.
2.Once you determine the fabric type, turn fabric select dial to appropriate temperature setting (from 1 to 7).
Tip: As a guide, the digital display shows the setting number with the corresponding recommended fabric type.
C | 3. Once the iron reaches the selected temperature, it beeps |
and displays READY (C). |
The automatic shutoff feature in your iron works as follows:
11. | Water tank |
12. | Fabric select dial |
13. | Soleplate |
30 seconds
8 minutes
D
•Once the iron reaches appropriate temperature, it will turn off after 30 seconds of inactivity if left on its soleplate or tipped over on its side. If left vertically on its heel rest, it will shut off after 8 minutes (D).