AS685Pub1000002024 5/24/05 10:19 AM Page 4
Product may vary slightly from what is illustrated.
How to Use
This appliance is for household use only.
Important: For warranty verification, do not remove line cord sticker.
GETTING STARTED
Remove any labels, stickers or tags attached to the body or soleplate of the iron. Note: Use ordinary tap water for ironing. Do not use water processed through a home softening system.
Important: For optimum performance, let the iron stand for 90 seconds before beginning to iron
TO FILL THE WATER TANK
1.Spray nozzle
2.
3.Dry/steam and
4.Spray button
5.
6.Comfort Grip™ handle
7.Heel rest
8.
9.Auto off light
10.
11.Water tank
12.Chrome metal skirt
13.Soleplate
Symbols
Dry
Steam/Blast of
Steam
Spray
Self-cleaning
A
B
C
D
E
1.Grip the sides of the
2.Tilt the iron and using a clean measuring cup, pour water into opening until the water reaches the MAX level mark on the water tank (B). Do not overfill.
3.Close the
4.Plug in the iron. The
Tip: If unsure of a garment’s fiber, test a small area (on an inside seam or hem) before ironing.
FOR STEAM IRONING
1.Move the selector to the desired steam level (D).
2.Turn the
•The
•It then glows on and off during ironing.
3.When finished ironing, turn the
setting, move the dry/steam selector to and unplug the iron.
FOR DRY IRONING
1.Make sure selector is set to . You may want to empty the water (see “Emptying Water Tank After Ironing - Optional”).
2.Turn the
•The
•It then glows on and off during ironing.
3.When finished ironing, unplug the iron and place it on its heel rest.
4.Move the dry/steam selector to .
10-MINUTE AUTO SHUTOFF
For your peace of mind, the iron will turn off after 10 minutes of inactivity.
• The iron beeps and the auto shutoff light starts blinking to let you know that the iron has stopped heating (F).
• As soon as you pick up the iron, it starts heating again.
F
3 | 4 |