ENGLISH
Inspection and repairs
•Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.
•Do not use the appliance if any part is damaged or defective.
•Have any damaged or defective parts repaired or replaced by an authorised repair agent.
•Before use, check the power supply cord for signs of damage, ageing and wear.
•Do not use the appliance if the power supply cord or mains plug is damaged or defective.
•If the power supply cord or mains plug is damaged or defective it must be repaired by an authorised repair agent in order to avoid a hazard. Do not cut the power supply cord and do not attempt to repair it yourself.
•Never attempt to remove or replace any parts other than those specified in this manual.
•Do not attempt to repair the appliance. Take it to your nearest Black &
Electrical safety
This product must be earthed. Always check that the power supply
corresponds to the voltage on the rating plate.
Power plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (Class 1) appliances. Unmodified plugs and matching outlets will reduce the risk of electric shock.
Extension cables & Class 1 product
•A
•Up to 30m (100ft) can be used without loss of power.
To avoid the risk of electric shock, do not immerse the cord, plug or appliance in water or other liquid.
•If the supply cord is damaged, it must be replaced by the manufacturer or an authorized Black & Decker Service Center in order to avoid a hazard.
Additional safety instructions for irons
•Always route the cord carefully to avoid a tripping hazard.
•Do not use the appliance near water.
•Do not place the appliance near heat sources or directly under cabinets. Do not use the appliance in the presence of explosive or flammable materials.
•The filling aperture must not be opened during use.
•Steam may escape from the soleplate.
•Surfaces may be hot during use and during the cool down period.
•Set the temperature control dial to the min position before plugging in or out.
•Let the appliance cool down before leaving it unattended and before cleaning or inspecting any parts of the appliance.
•The power supply cord should not touch the hot soleplate during use or during the cool down period.
•Do not touch the soleplate until it has cooled down.
•Wait until the appliance has cooled down before emptying the water tank as the water may still be hot.
•Do not immerse the appliance, cored set or plug in liquids.
4