Auto SHUT-OFF

USING YOUR QUICKSTEAMTM PROFESSIONAL

WARNING: Always unplug unit from electrical outlet before filling or emptying Water Tank.

1.Fill Water Tank with cool water. To prolong the lifetime of your QuickSteamTM Professional, we recommend using distilled or de-mineralized water.

2.Plug unit into a properly grounded three-pronged electrical outlet, and set Lighted On/Off Switch to “On” position. Verify that light on switch is illuminated.

3.Hold Steam Nozzle over object that you desire to steam. Press Steam Trigger. Steam should begin flowing from Steam Nozzle in approximately 45 seconds.

4.When finished using QuickSteamTM Professional, set Lighted On/Off Switch to the “Off” position.

NOTE: It is normal for steam to flow from the Steam Nozzle for a period of time after the unit is turned off. This occurs because the Steam Trigger allows water to flow into the unit’s boiler. Once you release the Steam Trigger, the remaining water in the boiler will continue to flow from the Steam Nozzle for a period of time until the boiler is empty.

The QuickSteamTM Professional is equipped with an Auto Shut-Off feature. This protects the unit from damage that can occur from operating with a dry Water Tank. If the water level inside the Water Tank drops below the Water Fill Line (which can be found inside the Water Tank), the unit will automatically shut down and cannot be restarted until water is added and level exceeds the Water Fill Line.