Top Innovations SF-475 warranty Operating the Fabric Steamer, Other Steaming Tips

Page 10

USING THE FABRIC STEAMER

OPERATING THE FABRIC STEAMER

NOTE: Be sure that any desired attachments are connected and Water Reservoir is filled before following these steps.

1.Plug grounded power cord into a convenient 3-prong electrical outlet.

2.Switch Lighted On/Off Switch to “On” position.

3.

Steam Ready Light will illuminate while boiler is

FIGURE 10

 

heating. When Steam Ready Light deactivates (2-8

 

 

minutes, depending on amount of water in Water

 

4.

Reservoir) unit will automatically begin emitting steam.

 

Place garment on a clean, rust-free clothes hanger.

 

5. Place hanger (with garment) on Clothes Hanger Hook (FIGURE 10).

CAUTION: Use care when handling garments on the Clothes Hanger Hook. Pulling on the garment with too much force may cause the unit to tip over.

6.Direct Steam Nozzle towards bottom of garment. Steam will rise along inside and outside of fabric, removing wrinkles. Slowly slide Steam Nozzle vertically, from bottom to top of garment (FIGURE 11).

NOTE: Do not allow kinks to form in hose at any time during use.

7.Direct Steam Nozzle away from garment and smooth fabric with your free hand.

8.Repeat steps 6 & 7 as necessary until fabric is smooth and wrinkle free.

OTHER STEAMING TIPS

FIGURE 11

 

Curtains and draperies may be steamed while still hanging.

To remove wrinkles from towels, handkerchiefs and napkins, drape them over a rod or towel rack and gently steam them.

Heavier fabrics may require repeated steaming to effectively remove wrinkles.

To remove exceptionally stubborn wrinkles steam both sides of fabric.

For additional assistance in removing tough wrinkles, or to remove lint and other particles, attach Fabric Brush or Lint Remover to Steam Nozzle (see Attaching Lint Remover and Fabric Brush section on page 8 of this manual).

Use Press Pad in order to steam difficult spots and edges and to create creases in fabric. Slide your hand through the velcro strap on back of Press Pad to secure it to your hand. This will protect your hand from the flow of hot steam. Then steam fabric while pressing it firmly but gently against the Press Pad.

9.When you have completed your steaming tasks, immediately switch Lighted On/Off Switch to “Off” position and unplug power cord from electrical outlet. Refer to Proper Storage section on page 11 of this manual for information on proper cleaning and storage of Fabric Steamer.

10

Top Innovations, Inc.

Image 10
Contents Fabric Steamer Letter from the CEO Important Safeguards Important Safeguards Fabric Steamer Product Information Fabric Steamer Product Information Attaching the Telescopic Pole Extending Telescopic PoleConnecting Hose Attaching Lint Remover Fabric Brush / Cloth CoverFilling Water Reservoir with Water Operating the Fabric Steamer Other Steaming TipsProper Storage Removing Mineral BUILD-UPProblem Possible Cause Solution Customer Support Top Innovations, Inc ONE Year Limited Warranty Top Innovations, Inc Product Serial Number