Top Innovations SF-475 warranty Attaching the Telescopic Pole, Extending Telescopic Pole

Page 7

ASSEMBLING THE FABRIC STEAMER

ATTACHING THE TELESCOPIC POLE

1.Attach Pole Top by sliding it onto top of Telescopic Pole as shown (FIGURE 1). Note that Pole Top must align correctly in two grooves that run the length of pole.

2.Line up grooves of Telescopic Pole with two tabs inside Pole Base hole, and insert bottom section of Pole into Base (FIGURE 2).

3.Tighten knob by turning it in a clockwise direction until it is tight, and Telescopic Pole sits firmly in place in the Pole Base (FIGURE 3).

FIGURE 1

FIGURE 2

EXTENDING TELESCOPIC POLE

1.Locate bottom extension lock, and swing hinge outward as shown (FIGURE 4). Extend middle section of Telescopic Pole as far upward as it will go, then close hinge to relock bottom extension lock.

2.Repeat Step 1 for remaining two extension locks, until Telescopic Pole is extended to it’s full height.

NOTE: It is recommended to extend Telescopic Pole to it’s full height during steamer operation. This ensures full extension of Steam Hose for maximum flow of steam.

FIGURE 3

FIGURE 4

Top Innovations, Inc.

7

Image 7
Contents Fabric Steamer Letter from the CEO Important Safeguards Important Safeguards Fabric Steamer Product Information Fabric Steamer Product Information Extending Telescopic Pole Attaching the Telescopic PoleAttaching Lint Remover Fabric Brush / Cloth Cover Connecting HoseFilling Water Reservoir with Water Other Steaming Tips Operating the Fabric SteamerRemoving Mineral BUILD-UP Proper StorageProblem Possible Cause Solution Customer Support Top Innovations, Inc ONE Year Limited Warranty Product Serial Number Top Innovations, Inc