Tricity Bendix TBWM 1110 Service & Spare Parts, 0870 5, Customer Care Department

Page 19

Symptom

Possible causes

 

 

 

The machine vibrates when spinning

The internal packing has not been removed.

 

The machine is in contact with the wall or furniture.

 

The machine is not level.

 

The washing load is badly distributed in the drum.

 

Maybe there is very little laundry in the drum.

 

 

 

The door will not open

The water level is above the bottom edge of the door.

 

The machine is heating the water.

 

The drum is turning.

 

 

 

Spinning starts late or the machine

The electronic unbalance detection device has cut in because the

does not spin

 

laundry is not evenly distributed in the drum. The laundry is

 

 

redistributed by reverse rotation of the drum. This may happen several

 

 

times before the unbalance disappears and normal spinning can resume.

 

 

If, after 10 minutes, the laundry is still not evenly distributed in the

 

 

drum, the machine will not spin. In this case, redistribute the load

 

 

manually and select the spin programme.

 

 

 

The machine makes an unusual

The machine is fitted with a type of motor which makes an unfamiliar

noise

 

noise compared with other traditional motors. This new motor ensures

 

 

a softer start and more even distribution of the laundry in the drum

 

 

when spinning, as well as increased stability of the machine.

 

 

 

No water is visible in the drum

Machines based on modern technology operate very economically

 

 

using very little water without affecting performance.

 

 

 

Service & Spare Parts

In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning:

0870 5 929929

For the address of your local Service Force Centre and further information about Service Force, please visit the website at www.serviceforce.co.uk.

Before calling out an engineer, please ensure you have read the details under the heading “Something Not Working”.

When you contact the Service Force Centre you will need to give the following details:

1.Your name, address and post code

2.Your telephone number

3.Clear and concise details of fault

4.The model and serial number of the appliance (found on the rating plate - see picture)

5.The purchase date.

 

Mod

 

Prod. No

P0042 BD

Ser. No

 

Customer Care Department

For general enquiries concerning your Tricity Bendix appliance or for further information on Tricity Bendix products, please contact our Customer Care Department by letter or telephone at the address below or visit our website at www.tricity-bendix.co.uk.

Customer Care Department - Tricity Bendix

Major Appliances

Addington Way, Luton - -Bedfordshire

LU4 9QQ

Tel 08705 950 950*

*calls to this number may be recorded for training purposes.

19

Image 19
Contents Tbwm Child Safety InstallationUse Contents Ecological hints Your New Washing MachineInterest of the environment Prewash Main wash Fabric softener Child safety featureDescription of the Appliance Detergent dispenser drawerSpin button Control PanelDetergent dispenser drawer Mains-on light On/Off buttonStart/pause button Prewash buttonExtra rinse button Easy iron buttonOpening the door after the programme has started Programme informationAltering an option or a running programme Interrupting a programmeSelect the required programme Switch the machine onOperating Sequence Load the laundryLight corresponding to the pressed button illuminates Start the programmeSelect the required options At the end of the programme1000g = 1 kg Washing HintsWhich form? Which detergent?Important Notes Wash Care SymbolsWashing Programmes Min Soak Special ProgrammesMini Maintenance and Cleaning Water inlet filter Emergency emptying outSomething Not Working Customer Care Department Service & Spare PartsSymptom Possible causes 0870 5This guarantee does not cover Guarantee ConditionsStandard guarantee conditions European guaranteeTechnical Specifications Installation InstructionsAppliance must be connected to a cold water supply UnpackingPositioning Water inletStandpipe Water drainageJoining piece must have an internal diameter of 18mm Into a drainage standpipeSpecial conditions LevellingPermanent connection Electrical connectionBlue- Neutral Brown- Live Building-in Preparation and assembly of the doorFront view Consumer care telephone number 08705