Tricity Bendix TBWM 1110 Prewash button, Extra rinse button, Easy iron button, Start/pause button

Page 7

6 “prewash “button

The machine performs a prewash cycle at 30°C max. The prewash cycle ends with a short spin at 650 r.p.m. in programmes for cottons and synthetics, and with emptying of the water for delicates.

This option is not available with the wool/(handwash) programme , soak 30 and mini 30.

For use when washing heavily soiled laundry.

7 “extra rinse” button

This option can be selected with all programmes, except the wool/(handwash) programme , soak 30 and mini 30. The machine will add 2 rinses for cotton and 1 rinse for synthetics and delicates.

This option is recommended for people who are allergic to detergents and in areas where the water is very soft.

8 “easy iron” button

By selecting this button the laundry will be gently washed and spun to avoid any creasing. In this way ironing is easier. Furthermore the machine will perform 6 rinses instead of 3 for cotton and 4 rinses instead of 3 for synthetics. This function can be used only for cotton and synthetic fabrics.

If this option is selected for cotton programmes, the spin speed automaticaly will reduce to 900 rpm.

If this option is selected for synthetic programmes with a temperature of 60°C, the machine will perform a washing cycle at max 40°C.

9 “start/pause” button

This button has two functions: start and pause

Start

After having selected the required programme, press this button to start the machine; the corresponding pilot light stops flashing.

Pause

To interrupt a programme which is running, press the “start/pause” button: the corresponding pilot light starts to flash.

To restart the programme from the point at which it was interrupted, press the start/pause button again.

10 Programme progress display

By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on.

After the machine has started, only the running phase light illuminate and stay on. (If you have selected the “soak” programme the pilot light “prewash” illuminates”). When the programme has finished, the “end” pilot light comes on and the door can be opened.

The “end” pilot light flashes in the event of operating problems.

1 flash = the machine does not fill

2 flashes = the machine does not empty

4 flashes = the door has not been closed

To eliminate the problem, see paragraph “Something not working”.

If the “filter” pilot light flashes at the end of the programme this means that the drain filter must be cleaned.

11 Programme selector dial

The selector is divided into 5 sections:

Cottons

Synthetics

Delicates

Wool (handwashing)

Special programmes

Reset programme “off”

PROGRAMME

 

 

mini 30

off 95°

cottons

 

 

spin

E95°

 

drain

E60°

softener

 

 

E40°

rinses

 

 

40°

soak 30

 

 

30°

wool

30°

 

 

60°

 

40°

E60°

delicates

30° 40°

30° 40°

synthetics

7

Image 7
Contents Tbwm Child Safety InstallationUse Contents Ecological hints Your New Washing MachineInterest of the environment Prewash Main wash Fabric softener Child safety featureDescription of the Appliance Detergent dispenser drawerSpin button Control PanelDetergent dispenser drawer Mains-on light On/Off buttonStart/pause button Prewash buttonExtra rinse button Easy iron buttonOpening the door after the programme has started Programme informationAltering an option or a running programme Interrupting a programmeSelect the required programme Switch the machine onOperating Sequence Load the laundryLight corresponding to the pressed button illuminates Start the programmeSelect the required options At the end of the programme1000g = 1 kg Washing HintsWhich form? Which detergent?Important Notes Wash Care SymbolsWashing Programmes Min Soak Special ProgrammesMini Maintenance and Cleaning Water inlet filter Emergency emptying outSomething Not Working Customer Care Department Service & Spare PartsSymptom Possible causes 0870 5This guarantee does not cover Guarantee ConditionsStandard guarantee conditions European guaranteeTechnical Specifications Installation InstructionsAppliance must be connected to a cold water supply UnpackingPositioning Water inletStandpipe Water drainageJoining piece must have an internal diameter of 18mm Into a drainage standpipeSpecial conditions LevellingPermanent connection Electrical connectionBlue- Neutral Brown- Live Building-in Preparation and assembly of the doorFront view Consumer care telephone number 08705