Russell Hobbs RH1250RTG, RH1250TW instruction manual Fault Possible Cause Removing Methods

	settled unevenly.		recommended and settle
			the laundry in the machine
			evenly.
	Your machine rests on a		Prevent your machine from
	hard surface.		resting on hard surfaces.
FAULT		POSSIBLE CAUSE	REMOVING METHODS
		It is not plugged in.	Plug machine in.
		Fuse blown.	Replace the fuse.
		Electricity cut-off.	Check mains power.
		Start/pause button not	Press on start/pause
Your machine does not start.		pressed.	button.
		Programme knob ‘stop’	Switch the programme
			knob to the desired
		position.
			position.
		The machine door is not	Close the machine door.
		completely closed.
		Water tap is turned off.	Turn your faucet on.
		Water inlet hose may be	Check water inlet hose.
		twisted.
Your machine does not		Water inlet hose	Clean water inlet hose
intake water.		clogged.	filters.
		Valve inlet filter clogged.	Clean the valve inlet
			filters.
		The machine door is not	Close the machine door.
		completely closed.

FAULT	POSSIBLE CAUSE	REMOVING METHODS
Excessive foam is formed in the
detergent drawer.		Press on Start/Pause button.
		To eliminate foam formation,
		mix a spoon of softener with
		half litre of water, and pour the
	Excessive amount of detergent	mixture in the detergent drawer.
	used.	After 5-10 minutes, press on
		Start/Pause button again. For
		next washing operation, decide
		the dose of detergent as
		required.
		Use detergents produced only
	Wrong detergent used.	for automatic washing
		machines in your machine.

For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084 -29-