Russell Hobbs RH1250RTG Before Use, First Wash, Additional Functions, Half Load Detection

Using your machine

Before Use

∙Plug your machine in.

∙Turn on the tap connected to yoour machine.

∙Open the machine door.

∙Place your laundry in your machine.

∙Push the door of your machine until hearing the locking sound to close it.

∙Select the program you require.

∙Put detergent and softener in the detergent drawer.

First Wash

Before using the machine for laundry, ensure you run the machine on a cycle of 95°C, with detergent and without laundry.

Selecting a Programme

Select the appropriate programme for your laundry from the programme table below.

Additional Functions

Before starting the programme, you can select an additional function if you so wish.

∙Press on the button of the additional function you wish to select.

∙If the additional function symbol on the electronic display flashes continuously, the function you have selected will be activated.

∙If additional function symbol on electronic display blinks, the function you have selected will not be activated.

∙If an additional function fails to activaite, this is because not all additional functions are available with all programmes.

Half Load Detection

Your machine features a half-load detection system. If you only put laundry into the machine that is approximately half or less than half of the maximum laundry capacity stated for your machine , your machine will run so as to save washing time, water consumption and energy in some programmes (Cotton 95°, Cotton 60°, Cotton 40°). When half-load function is active, the machine can complete the programme you have set in a shorter time.

For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084 -15-