How to use
Before Use
•Plug in the machine
•Ensure the inlet hose is connected correctly and turn the inlet valve from its closed position to the open position.
•Check that the drainage pipe is connected correctly.
•Open the machine door.
•Place your laundry in your machine.
•Push the door of your machine until hearing the locking sound.
•Select the programme you require.
•Press/select any of the auxiliary functions that are required and if applicable to the programme*
•Put detergent and softener in the detergent drawer, (if required).
•Press the Start/pause button
First Wash
Before using the machine for laundry, ensure you run the machine on a cycle of 95°C, with detergent and without laundry.
Auxiliary Functions
•Before starting the programme, you can select an additional function if you so wish.
•Press on the button of the additional function you wish to select.
•If the additional function light on the function button pressed stays on continuously, the function you have selected will be activated.
•If the additional function light on the function button pressed flashes or flashes and goes out, the function you have selected will not be activated.
•The Easy iron and Rinse hold functions cannot be used in conjunction.
•If an additional function fails to activate, this is because not all additional functions are available with all programmes.
Important note
If the power is turned off at any stage of the washing programme and then turned on, your machine will continue the programme from the point where it was interrupted. This is not harmful for your machine.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
17