Installation
4.Adjust the level of washing machine by the adjustable feet. Please check if there is a gap between the four adjustable feet and the floor. If there is then adjust the level of the washing machine by turning the adjustable feet. Make sure that the machine does not sway and that it is completely level. After the adjustment is finished, turn the fixing nuts up tightly, so that the adjustment that has been made is fixed.
NOTE
The machine should not sway and all the adjustable feet should sit/touch the floor.
Location of the Washing Machine
•Check location where the washer will be installed. Make sure you have everything necessary for correct installation.
•Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.
•Do not place or store laundry products on top of washer at any times.
•Install the washer on the horizontal solid floor, flat,
•If the washer is installed on an unsuitable floor, it could make considerable noise, vibrate severely and cause a malfunction. If the washer is not level, adjust the leg up or down for horizontal installation.
•Never put cardboard, wood or other materials under your machine to try and stabilise the unit
•Ventilation openings must not be obstructed.
•Leave some space (right & left : 2cm, rear : 10cm).
•In case of
7