Water Tank | Singer ESP 2 instruction

GETTING TO KNOW YOUR STEAM PRESS

10.The Temperature Control Buttons are used to select a desired temperature by cycling through the list of choices above the buttons. Push the Temperature Control Buttons until the indicator light beneath the type of material you are going to press becomes illuminated.

11.The Water Tank

12.The Pressing Cushion is a fabric covered pad used for pressing gathered or contoured areas such as sleeves, darts, yokes

13.The Measuring Cup is designed to assist you in easily and consistently filling the Water Reservoir with the optimum amount of water. filling the Water Reservoir with the optimum amount of water. 14.The Spray Bottle allows you to moisten fabrics before pressing, when helps to make the pressing process easier and more effective in certain instances.

ABOUT THE AUTO SHUT-OFF

The Auto Shut- Off feature includes both an Auto Shot- Off and an Auto Wake-Up .These multiple function safety features deactivate electrical power to the heater when the Pressing Plate has been left closed against the Ironing Board for more than 10 seconds. Heater deactivation is signalled by a beeping sound.Heater Functionality is restored when the Pressing Plate is raised back up. Power to the heater will also be cut if the Pressing Plate is in the raised position without use for approximately

15 minutes(once again signaled by a beeping sound) The heating ability of the unit can only be restored in this situation by pressing the Temperature Control Buttons.

IMPORTANT: Auto Shut- Off does not mean that power to the unit is totally cut off. Power is always on, and the Power Indicator Light will Remain illuminated until On/Off Switch is set to "Off"position.