Clean White Course, Soak Course | Panasonic NA-F80T1, NA-F90T1

CLEAN WHITE Course

Sauce and condiment stain are washed out without any effort.

•In this course, automatic dispensing of fabric softener cannot be used.

•Do not use this course for clothes not suitable for bleach, such as colored or patterned garments.

•Oxidized bleach does not achieve the correct effect.

1	Press the [POWER ON] button and put in the laundry.
2	Press the [PROGRAM] button	• The light will indicate “CLEAN WHITE’’ Course.
	five times for selecting “CLEAN	• The process time selection can be selected such as
		below.
	WHITE” Course.
		1.	Wash: Any selection is possible
		2.	Rinse: 2 min and 3 min
		3.	Spin: Any selection is possible

3	Press the [START/HOLD] button.

•The machine will measure the load size without water (laundry sensing).

		«
		• The water level will be indicated automatically.
		• You can adjust the water level according to your
		desired level.
4	Put in the appropriate amount of	• Different brands of detergent may have different
4	detergent into the detergent drawer and	measuring scoops sizes. If the scoop holds other
	detergent into the detergent drawer and	than 40 grams, add the amount of detergent
	put appropriate amount of liquid bleach	than 40 grams, add the amount of detergent
	put appropriate amount of liquid bleach	recommended by the detergent makers for the
	into the softener/bleach compartment for	selected water level. See page 6 for details.
	the water level. Then close the lid.	• Please use the standard amount of liquid bleach as
	the water level. Then close the lid.	printed on the bleach container.
		• Water may not be supplied if the lid is open,
		depending on the setting of a water level.

The buzzer lets you know when the washing is finished.

This process to wash heavily soiled laundry.

Remarks : The laundry will be soaked for the choosen time, to give you better washing performance.

1	Press the [POWER ON] button and put in the laundry.
2	Press the [SOAK] button and select from 1, 3, 5 and 8 hours.
3	Press the [START/HOLD] button.	• The machine will measure the load size without water
3		(laundry sensing).
		«
		• The water level will be indicated automatically.
4	Put in the appropriate amount of	• Different brands of detergent may have different
4	detergent into the detergent drawer for	measuring scoops sizes. If the scoop holds
	the water level. Then close the lid.	other than 40 grams, add the amount of detergent
	the water level. Then close the lid.	recommended by the detergent makers for the
		recommended by the detergent makers for the
		selected water level. See page 6 for details.
		• Water may not be supplied if the lid is open,
	7 Add softener. See page 7 for details.	depending on the setting of a water level.

The buzzer lets you know when the washing is finished.

After soaking process is completed, it will automatically continue with “NORMAL” Course.

NA-F90T1 80T1_EN.indd 13

9/17/08 9:45:16 AM