Panasonic NA-F90T1, NA-F80T1 Troubleshooting, Following symptoms are not trouble, Symptoms Causes

Page 22

Troubleshooting

The following symptoms are not trouble.

Symptoms

Causes

 

 

Machine begins filling water in the

• When the laundry amount is large at the HIGH water level, the

middle of the wash.

machine sometimes fills automatically. When level goes down, the

 

machine fills automatically.

The water level is too high for the

• When the laundry is already soaked with water before the wash is

amount of laundry being washed.

started, or if there is water in the tub before the wash is started, the

 

water level will sometimes be higher.

The water level is too low for the

• With light laundry made of synthetic or blended fabric, the water level

amount of laundry being washed.

will sometimes be lower.

Midway during spinning, the

• When the laundry is unbalanced during spin, rinsing and automatic

operation suddenly changes to

correction of unbalanced laundry will begin. Later spinning will return

rinsing.

to normal condition.

The water is drained even filled by

• Do not leave more than 15 seconds while powered on. Fill the water

a bucket.

while powered off or after pushing the start button.

Softener spills out from softener

• Keep the level of the softener indicated to prevent the softener from

drawer.

flowing immediately.

 

• If you close the softener drawer forcefully, softener may spill out of

 

the drawer.

During draining, the laundry and

• To suppress detergent suds build-up, the washing tub turns slowly

the spinner rotates with irregular

and quickly.

movements.

 

The buttons do not work.

• Only the [WATER LEVEL] button is available after the machine

 

begins washing.

 

• To change the setting, press the [POWER OFF] button and reconfigure

 

the setting.

If you start with the rinse cycle, the

• When there is water in the tub, the operation starts with the draining.

tub is not filled with water.

After spin cycle is fi nished, the tub will be fi lled with water.

Water does not flow through the

• When the water level is set to very low, water sometimes will not flow

lint filter. Double Cascade does not

through the lint filter. Double Cascade does not operate when these

operate.

settings have been selected.

Washing machine does not run at

• Check if there is power failure.

all.

• Check if the power fuse has blown out or the breaker is actuated.

 

• Check if the power plug is plugged in thoroughly.

 

• Check if the “power switch’’ has been pressed.

 

• Has the water faucet been turned on?

 

• Check if the [START/HOLD] button has been pressed.

 

• Has the machine been programmed under [RESERVE] timer?

Water is not supplied.

• Check if the water faucet is turned on.

 

• Is the water supply cut off?

 

• Check if the connection of the water supply hose is clogged with dirt.

 

• Please refer to page 17 for cleaning water supply hose filter.

Washing operation still continue even

Washing time will be longer because of laundry unbalance, water

though the expected finishing time

feeding and draining condition.

had passed on Reserve Program.

 

Buzzer sounds followed by a

In the case when open the lid after setting the [CHILD LOCK] mode, it

draining when opening the lid

will force the draining process. Pull out the power plug from the outlet

during wash and rinse.

and replug it after 5 seconds.

Buzzer sounds when opening the lid

This is a reminder for a user not to put a hand and/or any object into the

during cascade rinsing or spinning.

tub. It is not out of order.

 

w To turn off the buzzer, close the lid.

Tub shaking with the sound of water.

This is the sound of the liquid to maintain the balance during spinning.

Water supply failure.

Normally after the water supply failure, the water will become muddy.

 

Detach the water feeding hose and turn on the water faucet to release to

 

due muddy water. Fix water hose and start washing.

Power failure.

In this case, [POWER ON] and [START/HOLD] buttons need to be

 

pressed again after electricity is restored. Then the machine will resume

 

operation automatically from beginning of the stopped process.

22

NA-F90T1 80T1_EN.indd 22

9/17/08 9:45:53 AM

Image 22
Contents Model No Thank you very much for purchasing Panasonic Washing MachineContents Never disassemble, repair or remodel this washing machine Safety & General PrecautionsMay cause a serious injury or death Do not place the washing machine onDo not use water with temperature above 50C Do not wash and spin waterproof sheets and garmentsCheck the installation AccessoriesProcedures before washing Name of partsLaundry Detergent How to use liquid bleach for Clean White Course How to use liquid detergentHow to use bleach How to use softenerEconomy’’ Laundering How to use powdered synthetic detergentHow to use powdered detergent Laundry TipsWASH, Spin Rinse Operations PanelOFF/ON START/HOLDNormal Course Mini CourseHyper Speedy Course Blanket CourseDelicate Course Prepare Before Washing Blanket How to fold BlanketWashable Blanket Clean White Course Soak CourseManual Setting Reserve Reserve ProgramCancelling end buzzer after washing Child Lock programWash Choosing Your Own Laundry SettingMaintenance SpinLint filter TUB DRYWater supply hose filter Main unit and tubPlease observe the following Instructions Placement How to installInstall Washing Machine Horizontally Power cordConnect the water supply hose Changing the position of the drain hose Bottom Cover Installation InstructionConnect external drain water hose Following symptoms are not trouble TroubleshootingSymptoms Causes Specification Error IndicationNA-F90T1 NA-F80T1 NA-F90T1 80T1EN.indd 17/08 94559 AM