Error display(When the error display comes on, a buzzer sounds and U and a number appear alternatively.)
Unable to drain
What to do:
Check the drain hose, making sure
●it isn’t clogged up
●its tip isn’t immersed in water
●it doesn’t extend further than 3 metres
●the water isn’t frozen.
●Cleaning the drain filter
(see page 29)
Correct any of these problems, then open the door, shut it and start the washing machine again.
Door is open
Unable to
Unable to supply
water
What to do:
●Make sure the door is shut properly.
What to do:
●The laundry may be too heavy. If so, unravel a tangle of items.
●The laundry may be too light. If so, add one or two bath towels.
●One or more items may be too large, such as blankets. If so, reduce the load.
●The washing machine may be on an unstable or uneven surface.
What to do:
●Check the tap is open.
●Check the water pipe or hose isn’t frozen.
●Check the water supply hasn’t been disrupted.
●Check the
Correct any of these problems, then open the door, shut it and start the washing machine again.
Correct any of these problems, then open the door, shut it and start the washing machine again.
Drain filter is not set
What to do:
●Make sure the drain filter is set properly.
(see page 29)
●An error display starting with H doesn’t sound the buzzer.
Press the power OFF button. If the display stays on, or it reappears when you press the START button, unplug the washing machine and contact your nearest Customer Service Centre.
32
2009/08/05 | 11:34:12 |
|
|
|
|
|
| ||
|
|
| ||
|
|
|
|
|