2.After Use, clean external surfaces of the tool with clean cloth.
3.
WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.
Replacing the Cleaning Solvent
1.When the solvent has become dirty, it will not clean effectively and must be replaced.
2.To drain solvent, place a sturdy con- tainer that is large enough to contain at least 20 gallons of solvent under the Drain Plug (11).
3.Be aware that when the Drain Plug
(11)is removed some solvent will be splashed and spilled. Prepare the area to contain spilled solvent.
4.Remove the Drain Plug (11) by turn- ing it counterclockwise.
5.Solvent will pour out of the Body (7) into the container.
6.When the solvent is all drained, replace the Drain Plug (11) and wipe out the Parts Washer with a clean dry rag.
7.Dispose of the cleaning solvent prop- erly. Check with your local authority for proper disposal method.
Cleaning Parts Washer
Components
1.The Flexible Pipe (24), Pump Hous- ing Cover (15), Screen (17) and other components may occasional need to be cleaned.
2.After draining the Parts Washer of solvent, remove these parts and blow clean with dry compressed air.
3.Wipe the components clean and rein- stall before refilling the Parts Washer with clean solvent.
SKU 98332 | For technical questions, please call | Page 11 |