Functions | Tool Set Up |
1.When used with an appropriate sol- vent (not included) this Parts Washer is useful for cleaning mechanical parts of dirt, grease and other con- taminants.
2.When activated, the pump directs a stream of solvent into the Body (7). The solvent is recirculated through the Screen (17) and back into the Body.
3.The solvent may be reused many times until it has become too dirty and must be replaced.
4.This tool includes a wash tub shaped Body (7), Work Shelf (6) and Work Basket (2). For holding, sorting or soaking parts.
5.The Cover (1) may be lowered to close the tool when not in use.
6.A fusible link in the Safety Plate (5) will melt in the case of fire, shutting the Cover (1) and suffocating the fire.
Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
1.Prior to use, the tool must be filled with up to 20 gallons of suitable solvent (not included). Appropriate solvents are available from Harbor Freight Tools.
Work Piece and Work Area Set Up
1.Designate a work area that is clean and
2.Route the power cord along a safe route to reach the work area without creating a tripping hazard or exposing the power cord to possible damage. The power cord must reach the work area with enough extra length to al- low free movement while working.
3.There must not be hazardous ob- jects, such as utility lines or foreign objects, nearby that will present a hazard while working.
4.Safety goggles or face shield, rub- berized gloves, apron, floor mat and other safety equipment must be pro- vided to the operator for safe opera- tion of this tool.
SKU 98332 | For technical questions, please call | Page 9 |