Delay Timer
Delay timer selection button
sA delay of up to 24 hours can be selected. The delay must be selected after choosing the wash programme.
sTo set the required delay, press the delay timer button (Figure 26). Each time the button is pressed the delayed start of washing is increased by one hour.
Cancelling the delay
sTo cancel the delay, press the delay timer button repeatedly to cycle through the full
sThe delay will be cancelled when 24 hours have been reached and the button is pressed once more. If the programme is changed the delay is also cancelled.
Additional functions
Additional function selection button depending on programmes.
sThere are 3 options: easy iron, extra rinse and intensive wash.
sPress the button and the desired option will be displayed (Figure 27).
sBy pressing the button several times you can choose between several combinations of one, two and up to three additional functions at the same time depending on the programme selected (Figure 28).
Option 1: Easy-iron
This option prevents garments from creasing by means of carrying out a special programme with special turns to fluff out the garments after
Option 2: Extra rinse
Increases the level of the final rinse obtained in the clothes; suitable for large loads and garments belonging to people with sensitive skin. However, this option will increase your water consumption.
Option 3: Intensive wash
This option, specially recommended for heavily soiled or stained clothes, achieves better results by extending the normal wash cycle.
If during the additional function selection, the programme is changed or the Start/Pause button is pressed, all the functions selected until then are cancelled.
drying time
| delay |
|
spin | timer | option |
fig. 26
drying time
delay
spintimer option
fig. 27
drying time
delay
spintimer option
fig. 28
15