Unpacking the Washing Machine
sRemove the base, corner protectors and top cover (Figure 1).
Removing the Transit Bolts
sRemove the screws holding the plastic covers to the back of the washing machine (Figure 2 and 3).
sLoosen and remove the 3 transit bolts (Figure 3).
sCover the holes with the plastic covers you have just removed (Figure 2).
Do not throw the transit bolts away. If you need to move the washing
machine after installation you should first replace the transit bolts.
fig. 1 |
fig. 2 |
fig. 3 |
fig. 4 |
3