Electrical information
Warning! This appliance must be earthed.
The mains lead of this appliance has been fitted with a BS 1363A 13 amp fused plug. To change a fuse in this type of plug, follow the steps below:
1.Remove the fuse cover and fuse.
2.Fit replacement 13A fuse, ASTA approved to BS 1362 type, into the fuse cover.
3.Replace fuse cover.
Important: Do not use the appliance without the fuse cover in position.
How to connect an alternative plug
)F THEHlTTED PLUG IS NOTOSUITABLE FOR YOURUSOCKET OUTLET LTHEN IT SHOULD BE CUTUOFFFANDNDISPOSED OF SAFELYLTO AVOIDITHEHRISK OFF electric shock. A suitable alternative plug of at least 13 Amp rating to BS 1363 should be used.
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:-
ss4HEHWIREEWHICHHIS COLOURED '2%%. AND 9%,,/77MUST BESCONNECTED TOOTHETTERMINALIWHICHHIS MARKED WITHWLETTER % OR% BY THE %ARTH SYMBOLB O L OR COLOURED '2%%. AND 9%,,/7
ss4HEHWIREEWHICHHIS COLOURED ",5% MUSTMBE CONNECTED TOOTHETTERMINAL WHICHHIS MARKED WITHWTHETLETTER . OR COLOURED ",!#+ OR ",5%
ss4HEHWIREEWHICHHIS COLOURED "2/7. MUSTMBE CONNECTED TOOTHETTERMINALAWHICHHIS MARKED WITHWTHETLETTER , OR, COLOURED 2%$ OR%"2/7..
)F IN DOUBT REGARDING THE ELECTRICALECONNECTIONCOF THISNAPPLIANCE CONSULT A QUALIlED ELECTRICIAN $ODNOTESHORTEN THE T supply cable, the appliance may require removing for servicing.
N.B. Ensure that the plug socket is situated in an easily accessible place.
6